Instruction manual

DVR Viewer2
English 39
bSwitching the Display Pattern of the Screen
The image display pattern can be selected from 4 patterns: full
screen, quad screen, 9 screen, 16 screen using the toolbar button.
bSelecting the Channel Displayed on the Screen
Right clicking the Viewer screen will display the context menu.
Clicking the channel you want to display within the context menu
will switch the channel display.
When using the quad screen, the number of the channels being
viewed is displayed in [Channel] of the operating panel.
Example: Displaying channel number 10 in the top right
screen
• The display pattern can also be selected from the menu
bar or from the context menu displayed on the screen.
• On the 4/9/16 screen, double clicking on a specific
image will display it on full screen.
01 09/29/2005 16:28:24
02 09/29/2005 16:28:23
03 09/29/2005 16:28:23
04 09/29/2005 16:28:23
01 09/29/2005 16:28:23
04 09/29/2005 16:28:24
02 09/29/2005 16:28:24 03 09/29/2005 16:28:24
01 09/29/2005 16:28:23
04 09/29/2005 16:28:24
02 09/29/2005 16:28:24 03 09/29/2005 16:28:24
01 09/29/2005 16:28:24
Toolbar
Full screen
Quad screen
9 screen
16 screen
(Context Menu)
• The channel being currently displayed is checked on
the specified channel.
Unchecking a channel results in the images of that
channel not being displayed but at least one image
display is necessary for each screen pattern, therefore
all the images on the screen cannot be turned off.
• The channel number of the image data that is not being
saved is not displayed in the context menu.
• Multiple channels cannot be selected.
• The images of each channel are played back
correspondingly.
Even when switching the displayed channel, if there is
no image data at the current point of playback, no
images will be displayed.
01 09/29/2005 16:28:24
Channel display of the displayed image