Operation Manual

To register a
new handset
to your base
unit
The handset(s) supplied with your base unit should not
need to be registered; only additional ones you have
bought separately.
Each handset can be registered to up to four base
units, numbered 1 to 4.
1 Press and hold the HANDSET LOCATOR
button on the base unit until you hear
Registration tone (slow ‘beeps’)
You now have 30 seconds in which to register
the handset.
2 On the handset, press the PROG button
then key in 1 6 followed by the base unit
number
If this is the first base unit you’re registering to,
its number is 1.
3 Key in 0000 (the base unit’s PIN code)
4 Press the PHONE button
The display shows the handset numbers which
are still free on the base unit.
5 (Optional) Key in a handset number
If you don’t key in a number at this point, the
handset will be registered with the lowest free
number.
The handset beeps to confirm registration.
Using a multi-handset system
20
E:\Binatone2003\e3400\e3400_07.vp
11 March 2003 10:11:57
Color profile: Generic CMYK printer profile
Composite Default screen
Downloaded from www.Manualslib.com manuals search engine