Operation Manual

Customising your handset
General points You can customise the settings of your e3250 handset,
using a menu which is shown on the handset’s display.
Please note that:
■
If you don’t press any button for about 25 seconds,
the handset will time out and the display will return
to standby mode.
■
When you confirm any setting you have made, you’ll
hear a confirmation tone. If you make a mistake,
you’ll hear a warning tone.
■
At the end of each set of steps, you can return the
handset to standby mode by either:
—
replacing the handset on the base unit
—
pressing and holding the HANG UP/C button
Auto-answer When a call comes in, you need to press any button to
answer it. Or you can set auto-answer — so, if the
handset is in place on the base unit, you simply lift it to
answer the call, without pressing any button.
1 Press the PROG button then 1 5
2 Use the ▲ or ▼ button to set:
0 for auto-answer off
1 for auto-answer on
3 Press the PHONE button to confirm
Binatone Help Line: 01325 304 473 23
E:\Binatone2003\e3400\e3400_07.vp
11 March 2003 10:11:57
Color profile: Generic CMYK printer profile
Composite Default screen
Downloaded from www.Manualslib.com manuals search engine