Operation Manual

Customising your base unit
General points You can customise the settings of your e3250 base unit,
using a menu which is shown on the handset’s display.
Please note that:
■
If you don’t press any button for about 25 seconds,
the handset will time out and the display will return
to standby mode.
■
When you confirm any setting you have made, you’ll
hear a confirmation tone. If you make a mistake,
you’ll hear a warning tone.
■
At the end of each set of steps, you can return the
handset to standby mode by either:
—
replacing the handset on the base unit
—
pressing and holding the HANG UP/C button
Emergency
numbers
These two numbers can be dialled even when call
barring is set (see page 28).
1 Press the PROG button then 2 2 3 1
2 Key in the first emergency number
3 Press the PHONE button to confirm
4 Press 2 3 2
5 Key in the second emergency number
6 Press the PHONE button to confirm
Binatone Help Line: 01325 304 473 27
E:\Binatone2003\e3400\e3400_07.vp
11 March 2003 10:11:57
Color profile: Generic CMYK printer profile
Composite Default screen
Downloaded from www.Manualslib.com manuals search engine