Operation Manual

Indirect Network

You can use this feature if you make some of your calls

via a different network from the one that supplies your

exchange line. By using indirect access to an alternative

network, you may be able to save money on long-

distance and international calls. When you subscribe to

an alternative network provider, they will send you a

network access code

To route calls over the alternative network, you need to

key in the access code each time you make a call. Your

e3250 can do this automatically when you dial a long-

distance or international number (beginning with 0),

either manually or from memory.

For local calls (numbers not beginning with 0), the

e3250 will not dial the network access code; so these

calls will be routed over your local network. You can

also set two ‘local’ dialling codes, beginning with 0, for

which the network access code won’t be dialled.

The network access code and the additional ‘local’

dialling codes are set on the base unit, and apply to all

registered handsets. But you need to turn the Indirect

Network feature on and off on individual handsets.

To set the

network

access code

1 Press the PROG button then 2 4 0

2 Key in the network access code (up to six

digits)

3 Press the PHONE button to confirm

E:\Binatone2003\e3400\e3400_07.vp

11 March 2003 10:11:58

Color profile: Generic CMYK printer profile

Composite Default screen

Downloaded from www.Manualslib.com manuals search engine