Operation Manual

Read these notes first
Choosing a
site for the
base unit and
charger pod
The base unit and charger pod(s) should each be placed
on a level surface, in a position where:
■
the mains adapter plug will reach an easily accessible
230-V
AC switched mains supply socket — never try
to lengthen the mains power cable
■
the base unit’s telephone cable will reach your tele
-
phone line socket or extension socket (the charger
pod does not have a telephone line connection)
■
it is not close to another telephone — this can cause
radio interference
■
it is not close to a sink, bath or shower, or anywhere
else where it might get wet
■
it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
Radio signals
between
handset and
base unit
To use your handset and base unit together, you must
be able to establish a radio link between them. Be
aware that:
■
Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
■
Other solid structures, like walls, may reduce the
signal strength.
Mains power
connection
IMPORTANT —
■
The e3250 base unit must be used with mains
adapter, part no. XX002136D, supplied with the
unit.
■
The e3250 charger pod must be used with mains
adapter, part no. XX002137D, supplied with the unit.
Using any other adapter will result in non-compliance
with EN60950, and will invalidate any approval given to
this apparatus.
Binatone Help Line: 01325 304 473 3
E:\Binatone2003\e3400\e3400_07.vp
11 March 2003 10:11:53
Color profile: Generic CMYK printer profile
Composite Default screen
Downloaded from www.Manualslib.com manuals search engine