User guide

PBX use

“The Recall

function doesn’t

seem to work.”

You may need to press and hold the R button for a

couple of seconds, rather than pressing it briefly. Try

this and see if it works.

“Last Number

Redial and/or

memory dialling

don’t work on

a PBX.”

When you first make a call, press the Redial/CDS/P

button for a pause between the outside line access

code (e.g. 9) and the telephone number. You should

later be able to redial the number.

When storing numbers in memory, you can include the

outside line access code (e.g. 9) with each number.

If your PBX requires you to wait for a second Dial tone

before dialling the telephone number, press the

Redial/CDS/P button for a pause between the access

code and the number.

You can also set up your e820 so that it automatically

inserts a 2-second pause after you dial the outside line

access code, as follows:

1 Press the PROG button then 2 5 0

2 Key in the line access code (up to four

digits)

3 Press the PHONE/OK button to confirm

Troubleshooting

E:\Binatone2004\e820\e820_UK_03.vp

15 November 2004 11:48:23

Color profile: Generic CMYK printer profile

Composite Default screen