User guide

9
--
Steadily ON: Answering machine is OFF.
00
Steadily ON: There are no voice messages in
the answering machine.
09
Flash in idle mode: Indicates the number of new
answering machine
messages. (e.g. there are 9
a capacity for 59.
Flashing during message playing: The selected
machine message is being
played.
Steadily ON: All the new messages have been read and there are 9
answering machine messages in total.
FF
Flashing: TAM memory is full.
3.4 Base Two Digit-LED Display Information
answering machine messages in total, with
new answering
--
Flashing: Time is not set and only old messages
remain.
An/09
Flashing: Indicates an incoming call / recording
of an incoming call.
The number (e.g. 09)
indicates the total number of new messages.
Flashing: Indicates the line remote access is in
progress.
L3
Steadily ON: Indicates the base speaker volume
level is 3. Nine volume
levels from L0 to L8 are
provided (L0 means ringer off). L3 disappears
after 3 seconds.
3.5
Overview of the Wireless Headset
1 POWER/TALK ON/OFF
a) In idle mode: Press and
wireless headset on or off.
b) During ringing:
Press to answer the call.
c) During a call: Press to end the call.
d) During registration: Press to exit the registration mode.
2
a) During a call: Press to increase the earpiece volume.
b) During ringing: Press to increase the ringer volume.
3
a) During a call: Press to decrease the earpiece volume.
b) During ringing: Press to decrease the ringer volume.
NOTE:
If the wireless headset is not registered, press and hold VOLUME UP/
FLASH together with VOLUME DOWN to initiate the registration mode.
VOLUME UP/FLASH ( )
VOLUME DOWN ( )
r A
hold to power the