User guide

4 USING YOUR PHONE

4.1 Make a Call

4.1.1 Preparatory Dialling

Enter the phone number and press <TALK> to connect to the line and

dial the number. When entering the number, if you make a mistake,

press <C/MUTE> to delete digits.

4.1.2 Direct Dialling

Press <TALK> to connect to the line and then enter the phone number.

4.1.3 Call from the phonebook

Press <MENU/OK>, <DOWN>, <MENU/OK> to access the phonebook and

Press <TALK> to dial out the selected phonebook entry.

(Note: if you enter a wrong digit you cannot correct it with the <C/MUTE> key.)

press <UP/DOWN> to select the desired phonebook entry.

4.1.4 Call from the Call List (only available with Caller Display)

Press <UP/CALLS> to access the Call List and press <UP/DOWN> to select the

Press <TALK> to dial out the selected Call List entry.

Note: You can also access the Call List by pressing <MENU/OK> twice.

4.1.5 Call from the redial list

Press <DOWN/REDIAL> to access the redial list and press <UP/DOWN> to

Note: The alphanumeric keys provide a short-cut to find entries beginning with

the corresponding letters.

desired Call List entry.

Press <TALK> to dial out the selected redial number.

4.1.6 Call timer

Your handset automatically times the duration of every call.

The call timer is displayed as soon as you answer a call or 15 seconds after

It is shown in hours, minutes and seconds format (HH:MM:SS).

4.2 Answer a Call

If the handset is not on the charging cradle:

When the phone rings, press <TALK> to answer a call.

Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or

charger will answer the call automatically, and no buttons need to be

4.3 End a Call

During a call press <OFF> to end the call.

pressed.

dialling and remains on the screen for 5 seconds after the end of the call.

select the desired redial number.

Put the handset on the base station or charger to end the call.