User guide

13
4.5 Adjust Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of the
During a call:
When you end the call, the setting will remain at the last selected level.
4.6 Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <C/MUTE> to mute the microphone and “MUTED” will display on the LCD.
Your caller cannot hear you. Press <C/MUTE> again to unmute the microphone.
4.7
In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER
OFF”
icon is displayed on the LCD.
4.8 Turn on the Keypad Lock
4.9 Redial the last number
You can redial any of the 10 last numbers called. If you have stored a name
4.9.1 Redial a Number from the Redial List
1. In idle mode, press <DOWN/REDIAL> to access the redial list.
Note: If the redial list entry shows a name, press <Hash/#> to view the number
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows
“
EMPTY
”
.
Note: The display will still flash the Call icon and show CALL or the Caller Display
number, when there is an incoming call, even if the ringer is turned off
To turn the ringer back on, press and hold <HASH/#> again.
Note: You can still use <TALK> to answer a call when the handset is ringing.
To turn the keypad lock off, press and hold <STAR/*> again.
You can lock the keypad so that it cannot be used accidentally while carrying it
The most recent last number will display at the top of the redial list.
of this entry.
around. In idle, press and hold <STAR/*> to turn on the keypad lock, and the
Turn off the Handset Ringer
Press <UP/DOWN> to select volume 1-5. The current setting is shown.
in phonebook to go with the number, the name will be displayed instead.
During a call, you can press SPEAKERPHONE to alternate between hands-free
speakerphone and normal handset use.
4.4. Handset Speakerphone
earpiece and speaker volumes.
<KEY LOCK> icon will display.