User guide

the alarm icon< > and

“

ALARM ON

”

flash on the handset display, and the

Note:

a. A key press will still disable the alarm even if the handset keypad is locked

b. The alarm volume level is the same as the settings of the handset ringer

volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds

at VOLUME 1

level.

when the alarm rings.

c. During an external call or internal call, if an alarm is set and when the alarm

time is reached, the < > and “ALARM ON” will still flash. An is reached.

alarm tone will be emitted from the earpiece to alert the user the alarm time

Once the user presses any key or presses and holds.

d. During paging or ringing, the alarm will not sound when the alarm time is

reached. However, if the snooze function is enabled and there is no paging

7.2.1 Turn on/off the Alarm

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.

2. Press <MENU/OK> and <UP/DOWN> to select ALARM.

4. Press <MENU/OK> to confirm.

Note: If ON is selected, you will be asked to set the alarm time.

7.2.2 Set the Alarm Time (If Alarm time is set to be ON)

2. Enter the alarm time in24 hour format.

3. Press <MENU/OK> to display "SNOOZE".

4. Press <MENU/OK> and <UP/DOWN> to select snooze ON or OFF.

5. Press <MENU/OK> to confirm.

3. Press <MENU/OK> and <UP/DOWN> to select ON/OFF.

<OFF> to disable the alarm, the display will revert to the call duration.

or ringing, the alarm will sound again at the end of the snooze period.

while the alarm is sounding, to stop the alarm and turn off the snooze function.

7.2 Alarm Settings

icon < > is shown on the handset display. When the alarm time is reached,

alarm tone rings for 45 seconds. You can press any key to disable the alarm.

If the snooze function is activated, the alarm will sound again at the end of the

snooze period of seven minutes. You can also press and hold <OFF>

Follow Steps 1 to 4 in Section 7.2.1.

You can set an alarm time on this phone. When an alarm is set, the alarm