User guide

24
6. Press <UP/DOWN> to step through the list of registered handsets, and
select the number of the handset you want to de-register.
7.4.4
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select FLASH TIME.
3. Press <MENU/OK> and <UP/DOWN> to select your desired flash time
4. Press <MENU/OK> to confirm.
You may need to change the recall (flash) time if your phone is connected to a
PBX. The recall time options are SHORT (the default value of 100ms),
7.4.5
A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorised use. The default
system PIN code is 0000.
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select CHANGE PIN.
3. Press <MENU/OK> and the display shows PIN?------
4. Enter the old system PIN.
5. Press <MENU/OK> to display NEW PIN?------, and enter your new 4-digit
6. Press <MENU/OK> to display CONFIRM?------, and enter your new 4-digit
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
7. Press <MENU/OK> to confirm
LONG,
with the current setting indicated by an asterisk.
MEDIUM (300ms) or LONG (600ms).
Change the Flash (Recall) Time
Change the System PIN Code
entered in Step 5 you must enter the new system PIN at step 5 again.
system PIN again.
(SHORT,MEDIUM,
system PIN.
7. Press <MENU/OK> to confirm, and the chosen handset will be de-registered.
This operation should only be necessary if one of your handsets becomes faulty
You will need to enter the 4-digit system PIN (Default PIN is 0000) in order to
Note: You cannot de-register the handset that you are currently using.
7.4.3
De-register a Handset
de-register a handset from the base station. A de-registered handset will have
1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE HS.
3. Press <MENU/OK> and the display shows PIN?----
4. Enter the 4-digit system PIN.
5. Press <MENU/OK> and the first handset number is displayed.
or lost and needs to be replaced.
the antenna flashing and REGISTER on the display.