User guide

29
You can use the TAM SETTINGS menu through the handset to change the
settings of your answering machine.
8.5 Answering Machine Settings
By default, the answer machine is set in ANS & REC mode which allows callers
to leave a message. This mode can be changed to ANSWER ONLY which
8.5.1 Set the Answer Mode
does not allow callers to leave a message. In that case, your callers will be
prompted to call back later.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select ANSWER MODE.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or
ANSWER ONLY.
5. Press <MENU/OK> to confirm.
You can record your own OGM for ANS & REC mode or ANSWER ONLY mode.
When you record your own OGM, it will be used when the answering machine
answers the call. If your personalised OGM is deleted, the pre-set OGM will be
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select OGM SETTINGS.
4. Press <MENU/OK> and <UP/DOWN> to select ANS & REC or ANSWER
restored automatically.
When your answering machine memory is full and it is in
ANS & RECORD
mode automatically after some messages have been deleted.
answer mode will change to ANSWER ONLY
automatically. It will return to
8.5.2 Record Your Own Outgoing Message (OGM)
ONLY.
,the
& RECORD
ANS
5. Press <MENU/OK> and <UP/DOWN> to select RECORD MESS.
6. Press <MENU/OK> to start recording your personalised OGM and
“RECORDING”
7. Press <MENU/OK> to stop and save your personalised OGM. Your newly
Alternatively, press <BACK> to return to previous screen without saving the
is displayed on the screen.
personalised OGM.
saved OGM will playback automatically.