User guide

5
2 INSTALLING YOUR PHONE
2.1 Connecting the base station
2.2 Installing and charging the batteries
1. Plug the power
supply and the
telephone line cord
into the base.
2. Plug the other end of the power adapter
3. Use only the power adapter and telephone
If you have a Broadband line
If you connect your telephone to a line with
insert a micro-filter between the telephone
and the telephone line, otherwise you may get
interference between the telephone and the
a broadband connection, you will need to
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
broadband, which could cause problems.
5
Put the handset on the base and charge for
15 hours before using the handset for the first time.
Use only the NiMH rechargeable battery type provided.
Position the battery compartment cover over the
The handset will give a beep when it is properly
placed on the base or charger.
batteries and slide up to click into place.
compartment with the polarity markings as shown
Place the 2 supplied batteries into the battery
1.
2.
3.
Right ear:
2.3 Installing and charging the wireless headset
1. Attach the ear hook to the headset body as
indicated, for either left or right ear operation,
2. Put the wireless headset on the base
cradle for charging before using. The
LED on the headset will light red when
according to your preference.
and will
Left ear:
on the charger,
is fully charged.
it is first placed
light blue when it
into a suitable 230Vac mains socket,
and the line cord into your telephone line socket.
line cord supplied.
Note: The headset battery is not a user-accessible or replaceable part.