User’s Guide MBP11 Baby Monitor The features described in this user's guide are subject to modifications without prior notice.
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP11. Now you can hear your baby sleeping in the other room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product-related questions, please call: UK 0845 218 0890 ROI 08187 62092 On the Web: www.motorola.
Overview of your Parent unit 1 Sound Level LED 3 GREEN and 2 RED LEDs turn on and off in real time to indicate the noise level in baby's room. When audio is being picked up by microphone of baby unit, the LEDs light up to in indicate audio level with reference to the sensitivity setting. The more LEDs light up, the stronger the sound is. If no LED lights up it means the sound level in baby's room does not exceed the thresholds set through the parent unit.
Overview of your Baby unit Important guidelines for installing our Baby Monitor 1 2 1 2 Power Indicator On when the baby unit is switched on. Off when the baby unit is switched off. Power Press and hold to power on/off the baby unit. • To use your baby unit and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
1. SAFETY INSTRUCTIONS ..................................6 2. GETTING STARTED...........................................7 2.1 Baby unit power supply.....................................7 2.2 Parent unit battery installation...........................7 2.3 Belt clip on parent unit and baby unit................8 3. USING YOUR BABY MONITOR.........................9 3.1 Power on/off the parent unit..............................9 3.2 Power on/off the baby unit ................................9 3.
1. SAFETY INSTRUCTIONS WARNING: STRANGULATION HAZARD - Keep the adapter cord out of baby's reach. NEVER place the baby monitor or its cord within the cot. Secure the cord some distance away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use.
2. GETTING STARTED 2.1 Baby unit power supply 2.2 Parent unit battery installation The parent unit comes with a battery pack. Charge the parent unit before you use it for the first time or when the parent unit indicates that the battery is low. Battery JACK DC JACK Battery PLUG DC PLUG 1. Insert the small plug of the power adapter into the side of the baby unit. 2. Connect the other end of the power adapter to the mains socket. NOTE Only use the provided power adapter. GETTING STARTED 1.
5. Insert the small plug of the power adapter into the side of the parent unit. 2.3 Belt clip on parent unit and baby unit 6. Connect the other end of the power adapter to the mains socket. 7. The Charging Indicator comes on. NOTE Only use the provided power adapter. 1. Belt clip mode: applicable for parent unit only. 2. Support stand mode: lift up and turn the belt clip by half turn to convert into support stand mode.
3. USING YOUR BABY MONITOR Please read these instructions carefully, and be reminded that this baby monitor is just intended as an aid. It is not a substitute for responsible, correct parental supervision. 3.1 Power on/off the parent unit 1. Provided the parent unit is off, press and hold 0 until the Link Indicator is on. The parent unit is now powered on and the parent unit will search for and link itself to the baby unit. 3.
4. DISPOSAL OF THE DEVICE (ENVIRONMENT) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
6. TROUBLESHOOTING Link light on the parent unit does not come on • Check whether the parent unit is powered on. • Check whether the supplied battery pack is correctly installed and that it is not drained. • Recharge the parent unit by connecting it to the power supply. Link light on the parent unit flashes • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 1.5 metre. • The baby unit may be switched off.
7. GENERAL INFORMATION If your product is not working properly... 1. Read this User's Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service at UK 0845 218 0890 ROI 08187 62092 To order a replacement battery pack for parent unit, contact customer service.
FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products.
8. TECHNICAL SPECIFICATIONS RF frequency band 1881.792 MHz - 1897.344 MHz Channels 10 Operating temperature 5ºC to 45ºC Baby unit voltage (Adapter output) 6V DC, 450mA Parent unit voltage 2.
BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.co.uk ________________________________________ . EC Declaration of Conformity We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London NW2 7HF, United Kingdom.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Mobility, Inc. All rights reserved. Version 4.
