User Guide R350 2nd edition www.binatonegps.
IMPORTANT IMPORTANT Satellite signals are required for this product to function in Navigation Mode. There may be occasions within your home or surrounding area when the signal strength is limited and Navigation may not be possible. This is quite normal for products of this type. You can check the number of satellite signals that the unit is receiving and the strength of those signals by viewing the GPS Receiver.
IMPORTANT Safety The Global Positioning System The Global Positioning System (GPS) is a satellite based system that provides location and timing information around the globe. The GPS is operated and controlled under the sole responsibility of the Government of the United States of America, who are responsible for its availability and accuracy. Any changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of you Binatone Personal Navigation Device (PND).
CONTENTS CONTENTS Important………………………………………………………………………. In the Box ……….………………………………………………………... 01 01 Safety …………………………………………………………………………… 02 The Global Positioning System …………………………………………… 02 Using Your PND in the Car .…………………………………………….. 02 Prohibited Areas .…………………………………………………….…… 02 Battery..…………………………………………………………………….. 02 Contents .………………………………………………………………………. 03 Quick Start Guide …………………………………………………………… Position of the Controls ………………………………………………… Charging the Battery …………………………………………………….
CONTENTS NAVIGATION 1. Introduction.…………………………………………………………. 15 1.1 GPS connection.……………………………………………… 15 2. Getting Started...……………………………………………………… 16 3. Navigational Map Screens.………………………………………….. 17 3.1 Free Navigation………………………………………………….. 17 3.2 Route Navigation………………………………………………… 18 4. Browsing the Map……………………………………………………. 19 5. Navigation…………………………………………………………….. 19 5.1 Free navigation…………………………………………………... 19 5.2 Route Navigation………………………………………………… 19 6. Go to…………………………………………………………………… 6.
CONTENTS 8.11 Brightness…………………………………………………………. 34 8.12 Calibration…………………………………………………….…… 34 9. Route Plan…………………………………………………..……….....…… 34 9.1 Navigating…………………………………………………….…….. 34 9.2 Waypoints……………………………………………………….….. 35 9.3 Simulate………………………………………………………….……. 35 9.4 Route Options…………………………………………………….…… 36 10. Route Navigation Menu………………………………………….…… 10.1 Route Plan………………………………………………………… 10.2 Detour……………………………………………………………… 10.3 Cancel Route……………………………………………………… 10.4 Go to……………………………………………………………….. 10.
QUICK START GUIDE Quick Start Guide Please make sure that you read all of the information contained within this user guide before operating this unit. If you experience any problems, please go through the user guide before contacting the customer helpline. Position of the controls 1. Touch Screen 2. Charge Indicator– Displays the battery charging status. Red; charging, Green; fully charged. 3. On/Off button – Turn On the unit when it is Off or in Sleep mode.
QUICK START GUIDE Charging the Battery Before using your GPS device for the first time, we recommend that you charge the unit for 5 hours via the mains/car charger, or until the charge light turns green. Plug the mains/car charger into the USB socket. NOTE: Charging via USB cable. It is possible to charge the unit via the USB cable but the charge time will be significantly increased. Also if the battery is very low the unit will not fully charge. The charging indicator on the unit will light up red.
QUICK START GUIDE Turning the Sat Nav Unit On/Off Press and hold the On/Off button on the top of the unit for around 3 seconds, the unit will power up and display the Menu screen. Press and hold the On/Off button for around 3 seconds during operation, the unit will show the following display, Turning the Sat Nav Unit Off or Sleep Mode Press the sleep icon to put the unit into sleep mode. Press and hold the On/Off button again, to bring the unit out of sleep mode.
QUICK START GUIDE Windscreen Holder Installation The car mount has a suction pad that fits to the windscreen or a flat area on the dashboard. A. Fitting to windscreen Pull the lever away from the suction pad. Place the pad on the widescreen and push the lever towards the pad until it clicks into place. B. Fitting the holding bracket It is best to fit this to the unit before it is attached to the windscreen.
MAIN MENU Starting Up Press the On/Off button on the top until the following screens are displayed, When you press MENU, the following screens will be displayed: 10
MAIN MENU Settings NOTE: You do not need to enter the SETTINGS menu before you start to navigate. If you press on the SETTINGS icon the following screen is displayed. To exit this page or exit any subsequent page, press the at the bottom of the screen. Any changes in settings will not be saved if you exit by using this key. Volume Press ’volume’ you can modify the volume level of the voice prompts. You can ” or “ ”.
MAIN MENU Language Press ”Language” to change the language. Use the and keys to scroll between further language options. Select the language you desire from the available options so that it is highlighted white. Then press to confirm and exit. About The About page contains information about your operating system software version. It also allows you to default the unit or to calibrate the screen to your touches. Default The unit will be returned to how it was when it left the factory.
MAIN MENU 4) Click on SDMMC folder to open it and then click on a picture or a further folder. To continue searching or to load a photo it into the viewer. To go back through the menu structure press the option “...” The following screen will be shown: Button function list of Picture Files: 1. Return : Press this to return back to the list of pictures on the unit. 2. Zoom out : Press to zoom out of the picture. 3. Zoom in : Press to zoom into the picture. 4.
MAIN MENU Button function list of Document Files: 1. Return : Press this to return back to the list of pictures on the unit. 2. Page number : This shows the number of the current page and the total number of pages in the document. 3. Page up : Press to scroll to the previous page. 4. Page down : Press to scroll to the next page. 5. Document name : This shows the file name of the current document. GPS Receiver NOTE: This page is for information only.
NAVIGATION 1 Introduction You have chosen a cutting-edge navigation system. Congratulations! Please enjoy using it. This navigation system leads you straight to your destination, whether you are travelling by car or on foot. You can navigate and plan your route with an easy-to-use and intuitive interface, just by using your finger. You can also use this application to plan your trip to suit your personal preferences and interests and to save interesting destinations before you set off on your journey.
NAVIGATION 2 Getting Started Please make sure that the battery in your device is charged (see page 6). Switch on the unit and from the menu select Navigation. The navigational software will start to load. First you will see the warning statement screen. Tap on “Accept” to confirm that you have read the statement and to continue. If you do not wish to be shown this screen in the future check the box next to “Don’t show this statement again”.
NAVIGATION 3 Navigational Map Screens The navigational map screens will be the most frequently used screens. The two navigation screens are free navigation and route navigation and are shown below. Though the screens look very similar there are some differences. 3.1 Free Navigation 1 Zoom out – 2 Compass – Tap to zoom out on the maps. Shows your current heading by means of a letter, while the red part of the compass needle always points North. (Tapping will change between 2D & 3D view).
NAVIGATION 3.2 Route Navigation 11 Speed limit– Shown when you exceed the speed limit of the current road, if switched on via the settings (see page 29). 12 POI icon – Show the position of a point of interest. 13 Turn indicator – Shows a graphical representation of the next manoeuvre and the distance to the manoeuvre. Tap to replay the voice instruction. 14 Current road – Shows the name of the road you are currently on. 15 Menu button – Tap to access the navigation options.
NAVIGATION 4 Browsing the Map When in Free Navigation or Route Navigation it is possible to browse the map so that you can look at parts of the map which are currently not shown. To move the map around use the stylus (if provided) or your finger to press and hold on a point on the map, then drag the map in the opposite direction you want to look at. E.g.
NAVIGATION 6.1 Entering an Address/Postcode One of the most commonly used methods for inputting a destination into the unit, tap Address the screen will change to show the following. This screen shows a list of any previously used cities/towns. You will also be able to enter a new city name as well as changing the country you wish to search within. Every time you enter a new city it will be added to the list of recent cities so that it can be quickly used in the future.
NAVIGATION search for and match whether these are entered or not. E.g. for CÁDIZ simply enter CADIZ. Tap or (number keyboard) to enter a space. Tap to delete an incorrect letter. Tap or to change between numbers and letters (number keyboard only). Tap to change the keyboard language if available, you can now access the languages special characters by tapping as above. (see page 27 for how to select keyboard language). Tap screen.
NAVIGATION Tap on the House No. field to enter the house number, you will be taken to the keyboard screen again. If the house number cannot be found you will be taken to the default position. Tap on the Crossroad field to select a point where another road joins the entered road. The screen will change to show a list of all joining roads, use the or keys to move through the list until you see the correct road. Select the desired road and tap or double tap to confirm.
NAVIGATION Scroll through the list using the or keys till you find the POI you are looking for. Select the item so that it is highlighted orange then tap or double tap the item to confirm. You will be taken to the Route Plan screen (see page 34). Alternatively you can tap in the white box at the top of the screen. This will bring up a keyboard screen, which allows you to search for the name of a particular POI. After entering the whole name or part name tap .
NAVIGATION allows you to search for the name of a particular POI. After entering the whole name or part name tap . Scroll through the list of POI until you find the one you are looking for and then tap or double tap to confirm. You will be taken to the Route Plan screen (see page 34). Note; When you carry out a search for a particular name of a POI. The unit will search from a larger distance around your current position, than it did from the original search. 6.
NAVIGATION the Route Plan screen (see page 34). Tap Tap to go back to the Search Menu screen. to view the location on the map and once in the map view you can browse the map (see page 19), to exit from the map view back to the previous screen tap Tap . to delete the currently selected address book entry. Warning: you will not be asked to confirm the deletion, so make sure that you wish to carry out this operation before tapping. 6.
NAVIGATION When entering in Decimal format. The N, S, W and E keys are replaced with + and -, where North and East are + and South and West are -. Use the . key to enter a decimal point. Tap to change between Degrees:minutes:seconds and Decimal formats. Tap to delete any incorrect characters. Tap to go back to the Search Menu screen. Tap to confirm the entered co-ordinates. The screen will then change to show the Route Plan screen (see page 34). 6.
NAVIGATION 2D – The map will be shown as if you were looking directly down onto your current position. The option with the orange indicator is the currently selected option. Tap to confirm the change. Note: You can toggle the map between 2D and 3D modes quickly, by tapping on the compass in the top right of the navigation screen. 7.3 Motorway Sign Post When switched on this option does two things.
NAVIGATION 7.4 Voice Guidance This option allows you to activate or deactivate the voice guidance. When deactivated the unit will no longer give spoken voice directions during navigation. When activated the box will be shown with a tick. Tap to confirm the change. 7.5 Auto Zoom Allows you to activate or deactivate the auto zoom feature.
NAVIGATION 8.1 Language Tap to open the language selection screen. You can choose from 10 different languages. When a language is selected not only will it affect the text on the screen, but will also change the language of the spoken voice directions. Tap or to scroll back and forth between each page. Select the required language so that it is highlighted orange and tap to confirm. The unit will return to the settings screen. 8.2 Safety Alert Tap to open the safety alert options screen.
NAVIGATION Recording a trace record: Use the button to start the recording process. When active this button will then change to show . In this way the key will always show the option which is currently not selected. It is recommended that you start recording after your route has been planned or when you are in Free Navigation and you have a valid GPS signal, and you should stop recording once you have reached your destination.
NAVIGATION 8.4.1 Add an Entry To add an entry to the address book, tap . You will now be able to add a location using all of the options available when entering a destination under the Go to section (see page 19). Once you have added a location to the address book you can enter further information about that location. To enter further information tap on the white box next to the field name, the screen will change to show a keyboard which allows you to enter information. Tap to confirm the entered text.
NAVIGATION Tapping saved. will return you to the address book screen, but any changes will not be Note: Changing the address does not change the location of the address book entry, just the way the name is shown. 8.4.3 Delete an Entry To delete an entry from the address book, select the entry so that it is highlighted orange and tap , the entry will be deleted from the address book.
NAVIGATION 8.7 GPS Status When tapped the screen will change to the GPS status screen, Note; this can also be brought up by tapping from any of the navigation screens. This screen shows you information about your current GPS position. Including the date & time, your current speed, your current altitude above sea level and your current position in Longitude and latitude. Included with this information is the number of satellites which you are currently locked on to.
NAVIGATION In addition to setting either automatic or manually, you can select to adjust the time for daylight saving. This will adjust the time by adding 1 hour as used during British Summer Time (BST). To activate daylight saving tap in the box so that an orange tick is shown. Once set tap to confirm the selection and return to the settings screen. Tap to return to the settings screen without saving. 8.
NAVIGATION While you are navigating it is still possible to browse the map (see page 19). Note that the unit will continue to navigate if you are moving, but your position on the map will not be to return or wait for 10 seconds updated and no voice prompts will be given. Tap after which the unit will automatically resume normal navigation. While the unit is calculating the route you can tap and return back to the Route Plan screen. at any time to cancel the route 9.
NAVIGATION Tap to keep your current location as the start point, the unit will begin calculating the route and then drive the route automatically. 9.4 Route Options The route options menu allows you to configure the route to your preference. Tap the screen will change to the route options screen. From here you can enable or disable a number of options relating to how the route is calculated. The currently selected options are shown with an orange indicator.
NAVIGATION Tap to confirm the new route the unit will return to the navigation screen but will now direct you via the detour route. Tap to return to the detour screen, if you were not happy with the new route and would like to select a different option or if you no longer want to add a detour. Tap again from the Detour screen to go back to the Route Navi Menu screen (see page 35). 10.
Frequently asked questions Frequently asked questions I can’t find an address. Please make sure you have correctly spelt your entry. If you do not know how an address is spelt correctly, simply enter the parts of the address, you know of sure (e.g., “ond”, “Leic” for Leicester Square in London). Then browse the results list and look for the address. Also make sure the the city in which you are looking for an address is correct.
Technical Specifications Technical Specifications CPU MSTAR 2521 500 MHz Operating System Microsoft WinCE.NET 6.0 Core Version Antenna Built-in GPS high sensitivity receiver (64 channels) Memory 128MB DDR2 Built-in Display 3.5″colour TFT touch screen Weight 0.122 kg Input Method Touch Expansion Slot MicroSD card Speaker Built-in 1.0W loud speaker Headphone 2.5mm Mini jack USB USB Client for Active Sync Battery Re-chargeable Lithium Polymer battery I/O Dimension 100mmx75.5mmx12.
EC Declaration of Conformity BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.co.uk ________________________________________ . EC Declaration of Conformity We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London NW2 7HF, United Kingdom.