User guide

You may need to change the recall (flash) time if your phone is connected to
a PBX. The recall time options are SHORT (the default value of 100ms),
MID (300ms) or LONG (600ms).
1. Press <MENU/OK> and <UP/DOWN> to select BS SET.
2. Press <MENU/OK> and <UP/DOWN> to select FLASH .
3. Press <MENU/OK> and <UP/DOWN> to select your desired recall(flash)
time (SHORT, MID, LONG).
4. Press <MENU/OK> to confirm.
7.4.3 Change the Recall (Flash) Time
A 4-digit system PIN code is used for changing the system settings of the
base station. It is used to protect your phone against unauthorised use.
The default system PIN code is 0000.
1. Press <MENU/OK> and <UP/DOWN> to select BS SET.
2. Press <MENU/OK> and <UP/DOWN> to select CHG PIN.
3. Press <MENU/OK> and the display shows OLD PIN?
4. Press <MENU/OK> and the enter the old system PIN.
5. Press <MENU/OK>, the display shows NEW PIN?, press <MENU/OK>
and enter your new 4-digit system PIN.
6. Press <MENU/OK>, the display shows CONFIRM?, press <MENU/OK>
and enter your new 4-digit system PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system
PIN entered in Step 5, you must enter your new PIN at step 5 again.
7. Press <MENU/OK> to confirm.
7.4.4 Change the System PIN Code
You can reset your phone to the default settings. After reset, all your
personal settings including your PIN numbers, the redial list and call log
entries will be deleted, and all answering machine messages will be erased,
but your phonebook remains unchanged, although the direct memory keys
(M1-3) and the Mailbox (key 1) memory will be deleted.
1. Press <MENU/OK> and <UP/DOWN> to select DEFAULT .
2. Press <MENU/OK> and you are requested to enter the 4-digit PIN
(default = 0000)
3. Enter the 4-digit system PIN.
4. Press <MENU/OK> to show CONFIRM?
5. Press <MENU/OK> again to confirm the reset.
7.4.5 Reset Your Cordless Phone
44