User guide
57
Note: If your answering machine is switched off, the phone will answer the
call after 14 rings, and you can then press the < * > and enter the 4-digit
remote access PIN (Default Remote Access PIN is 0000) to enter the
remote access mode.
When your answering machine memory is full and the answer mode is in
ANS&REC mode, the answer mode will change to ANSONLY automatically,
rings, to allow remote access.
It will change back to ANS&REC mode automatically after some messages
have been deleted.
When the answering machine answers a call, the base will start call
screening automatically and you will be able to hear the OGM and the
incoming caller.
Adjust the base volume control, if necessary.
You cannot screen a call from a cordless handset.
At any time if you want to pick up the call, you can press <TALK>
on the handset and the message recording will be stopped
automatically. If the answering machine is in the process of recording,
the message already stored will be saved.
Call Screening9.5.9
and will not allow callers to leave messages, but will still answer incoming
calls after the pre-set number of
)XQFWLRQV
.H\V
:KLOHPHVVDJHLVQRWSOD\LQJ While message is playing
Delete the current message playing
message from the beginning. Press twice
3OD\WKHPHVVDJH 6WRSWKHFXUUHQWPHVVDJHSOD\EDFN
6NLSWRSOD\WKHQH[WPHVVDJH
Turn off the answering machine
Press once to repeat playing the current
Turn on the answering machine
to skip back to the previous message.