User guide

9.10

You can record a memo message for another user. When you record a

memo, it is saved as a new message and can be played back in the same

way as answering machine messages. Memo recording can still function

even when the answering machine is turned off.

9.10.1 Using the direct key

"RECORDING"

2. When you want to end your memo recording, press <PLAY/STOP>.

The memo will then play back. Let it play to the end or press

OR press <DELETE> at any time to stop the memo without saving it.

9.10.2 Using the Menu

1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.

2. Press <MENU/OK> and <UP/DOWN> to select MEMO.

3. Press <MENU/OK> to start recording the memo, and RECORDING

4. Press <MENU/OK> to end your memo recording and the memo will

then play back.

Let it play to the end or press <MENU/OK> again to stop the playback

Note: If the memory becomes full, during the memo recording, you will hear

a tone, the recording will stop and the memo recorded will start to play back.

and a timer are shown on the display.

and save the message.

OR press <DELETE> at any time to stop the memo without saving it.

9.11

If the answering machine is ON and set for ANS & REC, when there is an

incoming call, the answering machine will answer it and play the OGM,

followed by a beep sound. The caller can then leave a message of up to 1,

2 or 3 minutes, or of unlimited length up to the available memory on the

answering machine, as set in section 9.12.2. If the BS SCREENING is ON,

station, to allow you to screen the call and decide if you want to leave the

answering machine to record the message, or if you want to talk to the

the caller's voice will also be played through the loudspeaker on the base

Incoming Call Messages (ICM)

Record a Memo on the TAM

and then and the current recording time. Release the

caller directly.

button and start talking.

<MENU/OK> again to stop the playback and save the message.

Press and hold <SKIP> and the display will briefly show MEMO,