User guide

65
9.12.6 Change the Compression Rate
Three different compression rates (HIGH, MEDIUM and LOW) are provided
lower the compression rate, the higher the recording quality level attained,
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> and <UP/DOWN> to select
3. Press <MENU/OK> and <UP/DOWN> to select
4. Press <MENU/OK> and <UP/DOWN> to select your desired
compression rate.
for you to select different quality levels of recording incoming message. The
but the shorter the total recording time available. (LOW = 20 minutes,
MEDIUM = 30 minutes, HIGH = 50 minutes approximately.)
ANS. MACHINE.
TAM SETTINGS.
COMPRESSION.
5. Press <MENU/OK> to confirm.
Remote operation
Using a tone-dialling phone, dial your home number
You can also use the codes on the other side of this card
While your outgoing message is playing, press
Key in your remote security code
The default code is 0000. For details of how to set a new code,
see the User Guide 9.12.7 on page 65.
1
2
3
4
Note: The <*> key can be entered during or after the OGM and the 4-digit
Note: If your answering machine is switched off, the phone will enter into
the remote access mode after 14 rings.
You can then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
PIN should follow without any delays. If the 4-digit Remote Access
PIN is entered incorrectly three times consecutively, the line will be released
automatically.
9.12.7 Change the 4-Digit Remote Access PIN
Your phone lets you check your messages, or otherwise operate your
answering machine, by calling the answering machine when you are away
from home and then dialling a 4-digit remote access PIN from a tone-dialling
unauthorised access of your answering machine.
The 4-digit remote access PIN code is used to prevent other people from
phone.
Speakeasy Combo 3865
system