User guide

Using the button located between the (M2) and

(M3) buttons, you can adjust some of the settings on

your BT Relate 3000 to suit your personal preferences.

Ringer tone

Choose from three ring tones – R1, R2, R3.

LCD contrast

Select between 5 contrast levels for the display screen.

Amplify lock

Your BT Relate 3000 will remember the last selected

volume level for incoming or outgoing calls when amplify

lock is switched on.

You can switch between ON and OFF for this setting.

When OFF is selected your phone will revert to the factory

setting after use. These are:

Handset: Normal volume (setting one)

Handsfree: Mid-volume (setting three)

Headset: Normal volume (setting one)

Personalise your phone 23

BT Relate 3000 ~ Issue 2 ~ Edition 01 ~ 11.02.04 ~ 5958

WARNING

If Amplify lock is set to on, the

volume may be very loud. All users of

your BT Relate 3000 should be made

aware when the amplify lock is set

to on.

5958 Relate 3000 UG [1] 12/2/04 11:48 am Page 23