User guide

1571
You can turn off 1571 detection process which periodically
checks to see if messages have been left. You can switch
detection ON or OFF. The factory setting is ON.
Factory settings
The original settings on your BT Relate 3000 are:
Ringer Level
. . . . . . . . . . . . . . . . . . . Hi
Ringer Tone
. . . . . . . . . . . . . . . . . . . R1
Handset volume level
. . . . . . . . . . Setting 1
Headset volume level
. . . . . . . . . . Setting 1
Handsfree volume level
. . . . . . . . Setting 3
LCD Contrast
. . . . . . . . . . . . . . . . . . Level 3
Amplify Lock
. . . . . . . . . . . . . . . . . . . Off
VIP Ring
. . . . . . . . . . . . . . . . . . . . . . . Off
Voice prompts
. . . . . . . . . . . . . . . . .
Off
Beep Tones
. . . . . . . . . . . . . . . . . . . .
On
Amplifier
. . . . . . . . . . . . . . . . . . . . . . .
Incoming
Key Lock
. . . . . . . . . . . . . . . . . . . . . . . Off
M3 = Quickdial or Recall
. . . . . . Quickdial
To reset your phone to its original settings
1. Remove the Quickdial memory label.
2. Press the button.
Personalise your phone26
BT Relate 3000 ~ Issue 2 ~ Edition 01 ~ 11.02.04 ~ 5958
The button is located underneath
the quickdial memory label.
M1
M2
M3
5958 Relate 3000 UG [1] 12/2/04 11:48 am Page 26