User guide

2. Plug the other end into the mains power wall socket.
Connect the telephone line
1. Plug the telephone line cord into the telephone wall socket.
Setting the time
1. Press . Display shows WHERE?. Now press
(located between the and memory buttons). The
display shows SETUP MODE then HOLD STORE TO EXIT.
2. Press repeatedly until the display shows 12:00AM.
3. Use the keypad to enter the hour. (Clock not 24hr format.)
Please remember to input the leading zero.
4. Use the keypad to enter the minutes.
5. Use the buttons to select AM or PM, then press
and hold to confirm and return to standby.
Getting started 7
BT Relate 3000 ~ Issue 2 ~ Edition 01 ~ 11.02.04 ~ 5958
If you have subscribed to your
network’s Caller Display service, the
time will be set automatically when
you receive your first call.
Entering the hour and minutes
Enter single digit hours and minutes
with a leading zero. For example 7
should be entered as 07.
batteries
UM-30R "AA" SIZE
WARNING
Please disconnect
the telephone line cord
before opening this cover
The voice prompts will not work if
the mains power is not connected
and switched on.
5958 Relate 3000 UG [1] 12/2/04 11:47 am Page 7