Relate 600 User guide
At a glance Start button A Used as start button for storing numbers into the phone’s memory. Handset park When it is wall mounted, you can hook the handset on this if you need to temporarily move away from the phone. Handset clip Rotate for wall mounting to secure handset firmly in position. Timer button This button can be used to time your outgoing calls. SET UP © TO START PRESS A AND FOLLOW THE ARROWS Direct dial memory buttons Allows you to store up to 10 numbers (each up to 32 digits).
(The numbers can each be up to 32 digits long). Setting up Note: Instructions are revealed when directory label is removed. Follow these steps to get your Relate 600 ready for use. • Remove the memory label and pick up the handset. • The first ARROW indicator will glow, to indicate the start of the memory storing sequence, the LCD display will show three short lines. Check that your Relate 600 is complete. When you unpack you should have: • Relate 600 telephone with telephone line cord attached.
• When the call is answered, proceed with your conversation and replace the handset on completion. Call My Bill • Pick up the handset. • Press the CALL MY BILL button. • Listen to the billing information about your last phone bill. • Replace the handset. To change numbers stored in the memory To change or replace telephone numbers stored in the MEMORY, simply repeat the process used for storing the original numbers, but key in the new number.
Technical information Help If you have any problems using your Relate 600, this section will give you the most common, easy-to-follow solutions. Environment Your Relate 600 should be kept free of dust, moisture, high temperature, vibration and should not be exposed to direct sunlight. Do not stand it on carpets or other surfaces which generate fibres, or place it in locations which prevent the free flow of air over its surfaces.
Offices in Europe, North America, Japan and Asia Pacific. The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. TouchTone™ is a registered trade mark of British Telecommunications plc in the UK. © British Telecommunications plc 1996.
