Operation Manual

13
“The phone does Make sure you're using the telephone line cable that
not ring” supplied with your Trend 3 Executive. Other telephone
line cables might not work.
Check that the total REN value of all equipment
connected to your telephone line is not more than 4.
Disconnect one or more telephones.
“The Caller Display
feature isn't
Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
ALWAYS check  you have followed the steps listed on Section 2 to
first that: install and set up your Trend 3 Executive.
 all connectors are firmly inserted in their sockets.
Everyday use
“I cannot make or Make sure you're using the telephone line cable that
answer calls.” supplied with your Trend 3 Executive. Other telephone
line cables might not work.
 the batteries are correctly and securely installed,
and are not run down.
working”
You need to subscribe to the Caller Display service
from your network service provider. Contact the local
network service provider for details on how to subscribe.
The caller may have withheld their number by dialing
141. Or they may be calling from a network that does
not transmit the caller's number (e.g. it may be an
international call.)
“ERROR message
is displayed”
ERROR appears in the display if the unit detects
anything other than valid Caller Display information
during silent period after the first ring. This message
indicates either the presence of noise on the line, or
that an invalid message has been sent from the network
service provider.
Be sure to wait until the second ring before answering.
The Trend 3 Executive must be serviced by trained engineers. NEVER
attempt any repairs or adjustments yourself - you could make the problem
worse and invalidate the guarantee.
!
8. Troubleshooting