Datasheet

Product data sheet
Subminiature connectors
Product description Contacts: 4, female cable connector overmoulded, cable length 2 m
Area Snap-in IP40 Series 709
Order number 79 9004 12 04
Illustration Scale drawing Contact arrangement
Technical data
General values
Connector design female cable connector
Connector locking system snap
Termination moulded on cable
Wire gauge (mm) 0.25 mm²
Wire gauge (AWG) 24
Upper limit temperature 70 °C
Lower limit temperature -20 °C
Cable data
Sheath material PVC
Single-lead insulation PVC
Single-lead structure 32 x 0,10 mm
Cable diameter 4.5
Conductor resistance 80Ω/Km (20°C)
Bending radius, fixed cable 22 mm
Bending radius, moving cable 45 mm
Electrical values
Rated current (40 °C) 3 A
Rated voltage 60 V
Rated impulse voltage 800 V
Pollution degree 1
Overvoltage category II
Insulating material group III
Volume resistivity ≤ 3 mΩ
Insulation resistance ≥ 10¹⁰Ω
EMC compliance not shielded
Degree of protection IP40
Mechanical operation > 100 Mating cycles
Material
Contact material CuSn (bronze)
Contact plating Au (gold)
Contact body material PA
Housing material PUR
Date: 2019-03-04 - Page 1 of 2