User's Manual

ManualsBrandsBINSHINE TECH ManualsCamera & Photo12MP VERSA CAM /SECURITY ACTION CAMERA

User Manual

1.Download and install APP

Way 1:

Android Device by Searching "HIDVCAM" in Google App market to download and install App;

IOS Device by Searching "HIDVCAM" in App Store to download and install App;

Way 2:

Scan the QR code to download "HIDVCAM".

Introduction of LED indicator:

WIFI mode: The green and blue light up together.

AP mode: The blue lights up and the green flashes slowly.

Network cannot be found: The blue lights up and the green is off (Reset device)

The red lights up: being charged

Button Operations:

ON/OFF: press for 2 seconds to power on; press for 3 seconds to power off

MODE: Press for3 seconds to reset device( Or press “RESET” if no “MODE” )

Registry and Login:

1. Open the APP “HIDVCAM”,

2.Register your membership via WeChat \Facebook\Twitter\Line\ Email .

Summary of content (8 pages)

PAGE 1
User Manual 1.Download and install APP Way 1: Android Device by Searching "HIDVCAM" in Google App market to download and install App; IOS Device by Searching "HIDVCAM" in App Store to download and install App; Way 2: Scan the QR code to download "HIDVCAM". Introduction of LED indicator: WIFI mode: The green and blue light up together. AP mode: The blue lights up and the green flashes slowly.
PAGE 2
AP mode Connection 1) Turn on camera: Press “ON/OFF” to turn on the camera, in 10 seconds, and the blue light bright, the green light flashes slowly. 2) Go to the WIFI setting page, then connect the Wi-Fi named“ IPC-XXXXX”. 3) Open "HIDVCAM", Refresh the device list on the APP, you can view connected camera. 4) Click device, Set a password to the device on the first use, then can view camera on APP.
PAGE 3
Router mode Connection (Remote viewing) 1. Open app, go to device list, click [Settings]---[Network Settings]--- Choose an available WIFI from below options and input corresponding password --- clik OK --- click OK 2. After camera connet to router, refresh the page, waiting for about 30 seconds and the camera status will become online --- enter the password, can remote view camera.
PAGE 4
3.
PAGE 5
4. Interface Introduction Rotate Flip video Indicator Turn On/Off the Indicator of camera 1080p 720p/1080p Resolution selection Infrared Turn ON/OFF the IR of camera(night vision) Full Full screen view video Pause Pause the video Four view 1/4 screen view video Activity Zones Set the motion detection area Voice monitor voice Shot Video screenshot Start/Stop Real-time recording 5.
PAGE 6
.Cloud Storage 1) Click {Cloud } to enter the cloud storage page. 2) Subscribe the service your required. 3) Redeem your subscribed service, the device starts cloud storage recording 4) Enable/Disable: Start or stop cloud recording 5) Expand service: Renew your subscribes 6) Cloud recording: Watch the video in your cloud.
PAGE 7
.Device Share You could share your camera to others, such as relatives, friends, colleagues, and set the user permissions of shared camera. 1) Click “Settings” to enter the setting interface. 2) Click on "Authorization Settings" 3) Get the ID of the user who needs to share.
PAGE 8
FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.