Business WLAN Access Point bintec W2003n • Dual concurrent radio for simultaneous 2.4/5 GHZ operation • 802.11n 2x2 Mimo technolgy with up to 2x300 Mbps PHY rate • 200 mW transmitter power at 5GHz band • Managed by integr. WLAN controller or stand-alone operation • Two Gigabit Ethernet ports with PoE (Power over Ethernet) • Integrated Mimo antennas for 2.
bintec W2003n Business WLAN Access Point The bintec W2003n is an 11n access point with two single-band radio modules, allowing the device to operate in both the 2.4 GHz and 5 GHz bands simultaneously. A high-performance radio module enables up to 200 mW transmission power at 5 GHz band. Product description The unit is a perfect match for indoor wireless infrastructures designed to provide access over both frequencies. Smartphones, tablets, and older notebooks can connect to the the 2.
seamless coverage throughout the network. And seamless coverage is a must if you are, for instance, implementing a VoWLAN (Voice over WLAN) solution or using wireless barcode scanners for logistics applications. The W2003n gives you green IT right out of the box with its automatic energy-saving features. If no client is connected, the AP turns off any circuits not currently in use, downshifting to mimo 1x1. The Gigabit Ethernet ports support the energy-saving 802.
bintec W2003n (5510000324) W2003n, WLAN Access Point with a dual concurrent radio module according 802.11abgn (2.4/5 GHz) Mimo 2x2, 2 Gigabit ETH, PoE, integr. Antennas, incl. wall/ceiling mounting, incl.
Software Client Management Client overload protection (to much clients) and shifting of clients to other APs, if threshold is reached. Roaming Seamless roaming with IAPP (Inter Access Point Protocol), support according 802.11f Buffer pool For cushioning of peaks WMM 802.11e QoS Data prioritization for TOS data, 802.11e/WMM WMM 802.11e power save Support of active WLAN clients, which support 802.11e power save.
Hardware Environment Temperature operating: 0°C to 40°C; storage: -10°C to 70°C; rel. humidity 10 to 95% (non condensing) Wireless LAN (Radio 1) WLAN Standards 802.11b; 802.11g; 802.11n (Mimo 2x2) 2.4 GHz Receiver Sensitivity @ 2.4 GHz 1 Mbps -98 dBm; 2 Mbps -98 dBm; 5,5 Mbps -94 dBm; 11 Mbps -94 dBm; 6 Mbps -96 dBm; 9 Mbps 802.11b/g -96 dBm; 12 Mbps -95 dBm; 18 Mbps -93 dBm; 24 Mbps -90 dBm; 36 Mbps -87 dBm; 48 Mbps -83 dBm; 54 Mbps -82 dBm Receiver Sensitivity @ 2.
Wireless LAN (Radio 1) Broadcast SSID On/off switchable Power management for clients Registering of up to 250 clients per radio module simultaneously in access point mode. Default is 32 clients. Country-specific settings Channel settings according regulatory domain (802.11d) permitted RTS/CTS RTS/CTS threshold adjustable Wireless LAN (Radio 2) WLAN Standards 802.11a/h; 802.
Wireless LAN (Radio 2) Output power @ 5 GHz Max. 23 dBm (200mW EiRP) Automatic Rate Selection (ARS) Available Transmission rate Automatic Number of spatial streams 1 or 2 (802.11n) Bandwidth (802.11n) 20/40 MHz (bundling of two adjoining 20 MHz channels to one 40 MHz channel) Short guard interval (802.
Maintenance Configuration a. maintenance: SSH available, HTTPS, Telnet protected against 'bruce force attacks' Secure configuration Configuration a. maintenance: Load and save of configurations; save configuration optionally encrypted; optional, automatic Configuration export and import controlled via scheduler Configuration a. maintenance: No restart is required after the configuration has been changed. On the fly configuration Configuration a.
Access Points and Bridges WLAN Bridgelink Bundle W2003n WLAN Bridgelink Bundle contains 2x W2003n-ext, 2x 11dB/5GHz antennas (5510000358) dual-polarization, 4x antenna cable RSMA/N 0,5m (5500001541), 4x antenna cable N/N 3m (5500000846), 2x power supply (5500001254) Pick-up Service / Warranty Extension Service Package 'small' (5500000810) Warranty extension of 3 years to a total of 5 years, including advanced replacement for bintec elmeg products of the category 'small'.
