User Manual

lifestyle Upgrade
13
Installation Manual and Operating Instructions
OPERATION
ᆞ When using the Posterior Wash or Feminine Wash functions, pressing the“MASSAGE” ( , )
button will provide a pulsation spray.
ᆞYou may change the pressure of the spray by pressing the “High”( ) button or
“Low”( ) buttons.
ᆞPush the “MASSAGE”( , ) button again and the pulsating action will stop automatically.
Auto-Setting of Massage Feature
ᆞYou can set this function to automatically pulsate whenever the seat is occupied and the Posterior
or Feminine washes are in operation.
Step 1: Do not sit on the this product.
Step 2: Press the “MASSAGE”( , ) button for 3 seconds or until you hear a single Chime.
Step 3: Sit on the this product and proceed with Posterior or Feminine Wash.
Note : In the automatic setting, you may still adjust the pressure of the pulsating spray by
pressing the “high”( ) or “low”( ) functions.
Canceling the Automatic Oscillation function
Step 1: Do not sit on the this product.
Step 2: Press the “MASSAGE”( , ) button for 3 seconds or until you hear a double Chime.
MASSAGE (Rhythm Wash)
ECONOMY (Energy Save Mode)
- The ENERGY SAVER is not on when the LED light is off.
- Press button once to choose “ECONOMY 1”
- Press button again to choose “ECONOMY 2”
- Press button third time to turn “ECONOMY” off
*The ECONOMY 1 : the water temperature will be kept at 90
℉(32℃)
*The ECONOMY 2 (SMART MODE) : this will lower the water temperature to 90℉
(32℃)
when it is not
being used, and raise the water temperature back to normal level during the time of use.
It takes about 5 days for the unit to
“
learn
”
, and
“
remember
”
, the usage pattern of the user(s)
NOZZLE CLEANING (Automatically)
ᆞThis product has an automatic nozzle self-cleaning function that cleans the nozzle before and after each use.
CHIME SOUND ON/OFF SET
ᆞWhile sitting on the this product, press “MOVE”( , ) button for 3 seconds and you can hear
the chime sound change to ON or OFF. (Remote model doesn’t have off function, BB-1000)
NOZZLE CLEANING (Manual)
ᆞNozzle can be cleaned manually by pressing “Posterior Wash”( / ) button for 3 seconds
without being occupied on the seat and nozzle will come out without spraying water. After cleaning
the nozzle, Press “Stop”( , ) button to return nozzle to stand-by mode.
( , : in Simple Operation panel -Remote Model)
180205_BB-800,1000 USER's MANUAL_주소수정 및 타사필터 금지 문구 추가 必.indd 13 2018-02-08 오전 11:21:03