bio bidet bbc-270 Installation Manual & Operating Instructions pC bilodarPagN eumbre
B IO B ID E T B B C-270 WARNING Do Not over-tighten plumbing connections. Over-tightening plumbing connections can damage parts and cause leaks.
B IO B ID E T B B C-270 CONTENTS Functions and Characteristics ............................. 4 Parts list .................................................................. 5 Configuration .......................................................... 6 Final Assembly ....................................................... 7 Installation Instruction ..................................... 8 Maintenance ....................................................... 10 Warranty .........................................
B IO B ID E T B B C-270 Functions and Characteristics Ambient Temperature bidet model Adjustable Pressure Control Ingenious splash guard Quality silver brass parts Continuous Controlled Water Stream Brass T valve Removable nozzle for better hygiene No electricity or battery required Splash Guarded Nozzle Connects directly to fresh water line P.S.P.
B IO B ID E T B B C-270 Parts List Name Quantity 3/8” T Valve - Hot 1 7/8” T Valve - Cold 1 Hot water hose 1 Cold water hose 1 Owner’s Manual 1 Protective O rings 2
B IO B ID E T B B C-270 Configuration 7.79" 6.79" 5.5" 2.62" 2.32" 8.07" 17.
B IO B ID E T B B C-270 Your BBC-270 comes included with a 78” metal water supply hose to connect your bidet to your hot water supply valve. If this is not long enough to cover the distance from your toilet to your hot water supply line, additional 78” extension kits can be purchased by contacting our sales office at 847.458.2334.
B IO B ID E T B B C-270 Installation Instruction 1. CAUTION Do Not over tighten any connections. Over tightening connections and adaptor can cause damage to the parts. DO NOT OVER TIGHTEN CONNECTIONS. 2. PROCEDURES FOR ASSEMBLY 31 2 Shut water supply by turning it to the right and disassemble the water hose. Flush toilet to drain water inside of toilet water tank before disassembling the water hose. Remove existing seat and lid. Release the bolts on both sides of the existing toilet seat.
B IO B ID E T B B C-270 3 COLD WATER : Connect supplied T valve to the toilet fill valve. Connect water line to remaining open side of the installed 7/8” T valve. 4 3 Locate the hot water supply line in your bathroom under your sink and install supplied 3/8” T. Connect supplied hot water supply hose to remaining open side of the installed 3/8” T valve. 5 3 4 Mount bidet and toilet seat/lid over toilet mounting holes.
B IO B ID E T B B C-270 Maintenance To clean the nozzle, gently pull down on the head of the nozzle, and use a toothbrush of soft cloth and mild detergent to clean the nozzle. You may also remove the entire nozzle assembly and soak it into mild detergent. Do not use any harsh, abrasive products to clean unit, which may damage the surface of the product.
B IO B ID E T B B C-270 5. Any and all damages to plumbing, walls, floors, ceiling and personal properties resulting water leaks or breakage. The product must be used at the user’s own risk. Therefore, the owner hereby releases the manufacturer and distributor from any and all claims for damages where the above condition exists.
B IO B ID E T B B C-270 Warranty Your Bio-Bidet, when delivered to you in new condition in its original container, Is warranted against defects in materials or workmanship for one (1) year from the date of original purchase .
B IO B ID E T B B C-270 Thankyou Technical support / Customer Service BBC Innovation Corp 204 Berg ST Algonquin, IL 60102 T : 847.458.2334 U.S Toll Free : 877.339.5214 support@biobidet.com www.biobidet.
