Installation Manual

ManualsBrandsBio Bidet ManualsPlumbingIB-835 28" Luxury Toilet with Bidet Functions, Adjustable Heated Seat, Auto Flush, Intelligent Body Sensor and Wireless Remote with LCD Window in White

Installation Manual

Integrated Bidet Toilet

■ Cautions before installation

Water supply should have a minimum water pressure of 10 psi

For smooth drainage, water pressure must stay its required level.

TABLE OF CONTENTS

1. Dimensions .......................................

2. Precautions

for Installation

Preparation

before Installation

Package Contents.

Recommended Tools

6. Toilet Bowl Installation

■ Installing the Mounting Brackets

■ Mounting the Toilet Bowl

7. Toilet Seat Installation

■ Connecting t

he Water Supply Line

8. Troubleshooting

9. Warranty

IB 835

...................

....................................... 2...................

....................................... 3...................

....................................... 4...................

....................................... 5...................

..........................

............. 5...................

....................................... 6...................

....................................... 7...................

....................................... 8...................

Summary of content (9 pages)

PAGE 1
IB 835 Installation Manual Integrated Bidet Toilet ■ Cautions before installation Water supply should have a minimum water pressure of 10 psi For smooth drainage, water pressure must stay at its required level. TABLE OF CONTENTS 1. Dimensions .......................................................... 1 2. Precautions before Installation .......................................................... 2 3. Package Contents. .......................................................... 3 4.
PAGE 2
1.
PAGE 3
2. Precautions before Installation ■ Before installation, please check locations of water inlet and drain hole. ■ Connect angle valve to water inlet. ■ Make sure the floor is level before installing.
PAGE 4
3. Package Contents Toilet Bowl Mounting Bracket Screws Washer Mounting Bracket 3/8” and 7/8” 1/2” and 1/2” Wax ring Anchor Cap Toilet Bowl Mounting Screw Wax ring Cover Washer *Hose “B” packed in Bidet package 7/8” T-Valve *T-valve is packed in Bidet package Water Supply lines Glass & Tile bit 3/8” (Optional) 12”(305mm) Installation Template 4.
PAGE 5
. Preparation for Installation ■ Secure the wax ring on the bowl. ■ Wax ring installation 1) Remove protective wrapping. 2) With bowl upside down on a protective pad, place wax ring around opening. 3) Press wax ring firmly into place to assure adhesion when bowl is inverted.
PAGE 6
. Toilet Bowl Installation ■ Installing the mounting brackets 1) Align the installation template at center of drain socket. 2) Drill holes in the marked location ( 3/8”), and then insert the anchors into the holes 3) Remove the installation template and install bracket. 9"(228mm) 4"(100mm) Bracket Anchor 12"(305mm) Installation Template Wax Ring Toilet outline ■ Mounting the toilet bowl 1) Be sure to mount the toilet bowl with two people to connect the flange on to the drain socket.
PAGE 7
8. Troubleshooting Problem Does not flush Toilet leaks Toilet does not shut off Possible cause Corrective Action Water supply valve closed Open valve and allow water to fill tank. Supply line blocked Shut off water supply, disconnect supply line and inspect all washers. Pushrods do not contact flush valve Adjust pushrod length as required Water supply hose is not properly connected Disconnect water supply hose and reconnect. Loose bowl/floor connection Check bowl/floor connection.
PAGE 8
7. Toilet Seat Installation 1) Insert the seat mounting nut into the toilet seat mounting hole on the toilet bowl. 2) Hold the E-bidet with two hands and slide it into place. - Connect water hose to the bidet. Bidet Fixing Nut Installation Hole ■ Overhang Installation Part Connecting the water supply line 1) Connect T valve to angle valve. 2) Connect the water supply line to toilet tank and T valve. 3) Connect the water supply line to bidet and T valve.
PAGE 9
. Warranty ■ Warranty period The warranty period is 2 years from the date of purchase. See the included warranty statement for more information. Replacement Parts Model Flush Valve Fill Valve IB 835 WP373 WP222 ■ Inquiries For further product information, please contact your local USPA dealer or contact our Customer Support Center.