Operating instructions

Info centre "EasyTouch"
133
Pos: 12.19.5 /B A/Info-Center/Ha uptmenüs/Ha uptmenü 3 Wart ung/Menü 3- 1 Alle Mähwer ke auf 0° einstell en. @ 0\mod_1 197543574695_7 8.doc @ 2544 0
Aligning the Mowing Units
Fig. 116:
Front mowing unit:
• Place a manual spirit level centred on the cutter bar.
• Use the 1 key or 2 key to align the cutter bar horizontally.
Lateral mowing unit right:
• Place a manual spirit level centred on the cutter bar.
• Use the 3 key or 4 key to align the cutter bar horizontally.
Lateral mowing unit left:
• Place a manual spirit level centred on the cutter bar.
• Use the 5 key
5
or 6
6
key to align the cutter bar horizontally.
1 2
• Loosen the angle of rotation sensors on the right and left mowing unit and set them in the
oblong hole until a value (1) of about 2900 mV to 3100 mV appears in the display
(calibration screen).
• Screw the angle of rotation sensors tightly into place.
• Sensor value (2) for inclination 0° by activating keys
B
B
= left mowing unit
C
C
= front mowing unit
Note
The sensor for the front mowing unit is not adjustable. However, the value
must be accepted at this point.
D
D
= accept right mowing
unit.
Pos: 12.19.6 /B A/-----Seitenumbruch------ @ 0\mod_1 196175311226_0. doc @ 4165
BM 400 0220 0
5 6
7 8
B C D
BM 400 0030
1
1
2
2