Operating instructions

Adjusting the mowing units
259
Pos: 22.5.7 /Übersc hriften/Übersc hriften 3/A-E /Aushubhöhe ei nstellen @ 0\ mod_11966753 96916_78.doc @ 10668
11.2.2 Adjusting the Lifting Height
Pos: 22.5.8 /Übersc hriften/Übersc hriften 4/Fro ntmähwerk @ 0 \mod_1196674 467494_78.doc @ 10628
11.2.2.1 Front mowing unit
Pos: 22.5.9 /BA/ Einstellungen/Mä hwerke/Aushu bhöhe des Fr ontmähwerks einst ellen @ 0\ mod_11966618 30291_78.doc @ 9309
Fig. 226:
The front mowing unit can be suspended in several positions by means of the „Weiste‟ triangle.
This causes the front mower to lift up to a higher or lower position.
• In the upper position (1), the front mower lifts to a higher position
• At mid position (2) the mower is in the normal position
• In the lower position (3), the front mower lifts to a lower position
By linking the upper rod into the lower positions (2, 3) on the „Weiste‟ triangle, it is possible to
obtain a smaller adjustment to the front mower inclination. This keeps the cutting height
constant when making ground adjustments on very uneven land
Pos: 22.5.10 /B A/-----Seitenumbruch------ @ 0\mod_1 196175311226_0. doc @ 4165
Pos.1
Pos.2
Pos.3
BM 400 0176