Operating instructions

Placing in Storage
404
Pos: 38.10 /BA/Ei nlagerung/Selb stfahrer/Reibkup plung BYPY e ntlüften @ 0\ mod_1197387 210183_78.doc @ 20228
19.4 Friction clutch -ByPy
Fig. 352:
Completely loosen the four hexagonal socket head screws (2). These screws are not entirely
threaded. Therefore they cannot be screwed out of the coupling.
The coupling is now ready for use.
19.4.1 Venting the Friction Clutch on the PTO Shaft
Fig. 353:
Tighten the hexagonal socket head screws (2) on the friction clutch at the beginning of the
storage period. This will relieve the disc springs' pressure on the friction lining and prevent the
tendency to adhere. The flange coupling is vented.
To place the machine in service again, follow the instructions in chapter "Friction Clutch".
===== Ende der Stückliste =====