Manual

7.2 SETUP SCREEN
The Setup screen (see Figure 7-3) is used to select instruments and devices for use in a user-defined
method, name (alias) the Workstation and Maximizer inlets and create Buffer Blending buffer systems (Buffer
Editor). Instruments and devices may include: fraction collector (BioFrac, Model 2128, Model 2110 or generic
(non-Bio-Rad)); detector (Standard UV, QuadTec UV-Vis, pH, Conductivity, SIM); Valves (SVT3-2, SV5-4,
AVR7-3, AVR9-8), auxiliary pump (Econo Gradient, Econo EP-1 or a generic (non-Bio-Rad) pump) and a
Buffer Blender. When a new method is created, the devices defined in the default setup are automatically
loaded into the "Devices in setup" list. For this reason, devices that are used routinely should be saved as
part of the default setup with the File/Save Setup function. Furthermore, the Method Template feature
determines the type of detector (Standard UV or QuadTec) that should be included in each template from
the default setup.
Devices are added to the setup using the "Available Devices" buttons shown in Figure 7-3. When a device is
selected, a dialog is displayed that allows device specific parameters to be entered. When the maximum
allowed number of a device has been added to the "Devices in setup" list, the corresponding "Available
Devices" button becomes grayed out. Devices may be removed from the "Devices in setup" list by pressing
the toolbar Delete button. Double-clicking a device in the "Devices in setup" list opens a dialog used to edit
the device settings.
Figure 7-3. Setup Screen
Devices in setup
UV Detector
Conductivity Monitor
AVR7-3 Valve - Sample Inject Port 10
Available Devices
Maximizer + Gradient Pump: F10
SVT3-2
Valve
AVR7-3
Valve
SV5-4
Valve
AVR9-8
Valve
Detectors
Fraction
Collector
SV3
INJECT
P
U
M
P
Aux Load
Pump
Inlet A1: Buffer A1
Inlet A2: Buffer A2
Inlet B1: Buffer B1
Inlet B2: Buffer B2
BioLogic Duo-Flow - <user name> - <project name> - <method name> - <run name>
Edit
Method
New
Method
New
Run Browser Manual Setup Delete
Protocol
wash
load
1
2
Run
Notes
Report
PostRun
Log
Settings
WL1 - 280nm
0.40
WL2 - 260nm
0.15
WL3 - 214nm
2.00
WL4 - 405nm
0.00
Flow Rate EGP %B
0 %B0.00 ml/min 0%
% Split
1.00ml/min 0 %B2
Maximizer + Gradient Pump: F10 UV Conductivity
438 psi 1.003 AU 1.23 mS/cm
QuadTec
Econo Gradient
Pump
SIM1/pHSIM1/SIG
0.548 Volt 7.00 pH
File View Utilities Options Window Help
Edit
Bio-Rad
Web
Buffer Blender
Is assigned to buffer blender
Is assigned to buffer blender
Is assigned to buffer blender
Is assigned to buffer blender
Buffer Editor...
MODES OF OPERATION SYSTEM OPERATION
7-4