Instruction Manual

Instruction Manual | 76 | Automated Droplet Generator6 | Automated Droplet Generator
Using the Automated
Droplet Generator
2
2.1 Powering On the Automated Droplet Generator
The Automated Droplet Generator (AutoDG
™
) is designed to remain powered
on in order to preserve positive airflow inside of the instrument and track
consumable use. The instrument stays in an idle state when not being used.
Please see Section 2.2 for instructions on starting a run from idle mode.
1. When powering on the Automated Droplet Generator, you will see a startup
screen while the instrument powers on and performs a self-check. Please
note that the door will automatically close.
Fig. 1. Startup screen when instrument is powered on.