Instructions / Assembly

ManualsBrandsbioBidet ManualsBathBliss Electric Bidet Seat for Round Toilets in White

The following terms are used in this manual to indicate hazards of varying degrees of severity.

Indicates potentially hazardous situation which, if not avoided, may result in minor or

moderate injury or in damage to the product or other property.

Indicates potentially hazardous situation which, if not avoided,

could result in death or serious injury.

WARNING

Indicates an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

DANGER

CAUTION

READ ALL INSTRUCTIONS BEFORE INSTALLATION AND USE

DANGER - To reduce the risk of electrocution

WARNING - To reduce the risk of burns, electrocution, fire, or injury to persons

PLEASE OBSERVE THE FOLLOWING PRECAUTION BEFORE USING THIS PRODUCT

Do not open the product to repair or remodel.

Only qualified service personnel should service this product.

Do not use attachments not recommended by the manufacturer.

Do not dismantle

Connect this product to cold water supply pipe carrying potable water.

Do not connect to an industrial water supply line that

does not carry water of drinking quality.

This will negatively effect hygiene and performance.

Prohibited

About Low Temperature Burns-

A burn occurs when the skin has been exposed to high temperatures.

However, a low temperature burn may occur when the skin has been in contact with an

object at relatively low temperature (about 104 ). Close supervision is necessary when

this product is used by children or adults with sensitive skin.

Prohibited

If using any chemical toilet bowl cleaner, be sure to wipe up

any spills that splash onto Electric Bidet.

Do not use benzene or any acid chemical detergent.

Only neutral detergent permitted.

Prohibited

Do not plug in the power cord before connecting the water supply hose.

Prohibited

This product must be grounded.

An approved Ground Fault Circuit Interrupt must be used.

Grounding

Do not splash water on this product.

Please provide adequate ventilation to avoid high levels of humidity

which can damage the electronic components.

It is necessary to provide adequate ventilation with a fan,

open door or open window when bathing.

Do not spray water

Do not touch the power cord with wet hands.

Do not reach for a product that has fallen into water.

Unplug immediately!

Wet hands prohibited

This product must be connected to a standard voltage power source.

Do not connect power cord if the cord is damaged or broken.

Do not plug the unit into a loose electric outlet.

Observe at all times

Please disconnect the power cord when you clean this product or

detach it from toilet bowl.

Do not supply electrical power to the unit until the plumbing work

has been completed.

Observe at all times

Keep the electrical cord away from heated surfaces to prevent a fire

hazard.

Also, keep any flammable materials away from this product at all times.

Use of fire prohibited

Installation Manual and Operating Instructions

4 5

IMPORTANT SAFEGUARDS / GENERAL CAUTIONS

PREPARATION

Summary of content (8 pages)

PAGE 1
IMPORTANT SAFEGUARDS / GENERAL CAUTIONS READ ALL INSTRUCTIONS BEFORE INSTALLATION AND USE DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in damage to the product or other property.
PAGE 2
1 IMPORTANT SAFEGUARDS / GENERAL CAUTIONS CAUTION WARNING Prohibited Allow the seat and lid to close automatically. Do not force the lid closed. Prohibited Prohibited Do not stand or sit on the seat cover lid. It is not designed to support a user’s body weight. Prohibited Do not strain or push the connected hose and tube connecter; it may cause water leakage. Never drop or insert any object into any opening or hose. Use proper plumbing supplies if any modification is to be made.
PAGE 3
Identification 1 MAIN UNIT BB-1700 3 BB-1700 Control Panel Turbo Wash Nozzle PREPARATION Posterior Wash Nozzle Caution Label Lid Feminine Wash Nozzle Operation LED Window Deodorizer Stop all operation. Control Panel for BB-1700 Dryer Vent Drain / Quick Release Drain button Digital Occupied Sensor Heated Seat 2 ACCESSORIES For plumbing T-Valve For product fixation L-Valve Nuts (2 pcs) Installation instructions Cone packing (2 pcs) Posterior wash. Feminine wash. Turbo wash.
PAGE 4
3 Identification 1 MAIN UNIT 3 BB-2000 Remote Control BB-2000 Stop all operation. Posterior wash. Turbo Wash Nozzle Caution Label PREPARATION Feminine wash. Posterior Wash Nozzle Dry washed area. Lid VORTEX wash. When selected during wash function nozzle oscillates automatically for a wider wash. If move button is selected when user is not sitting on the seat, it operates nozzle shower function.
PAGE 5
6 Installation CAUTION BEFORE INSTALLATION Do not plug in before installation. If you need an electric power system or extension, please consult a qualified electrician. 5 Installation Catch Plate. 6 Place the plate and guides over each mounting hole. Insert the mounting bolts through the plate and mounting holes. Bolt and Nut Assembly. Slide cone packing and washers onto the bolts then fasten to securely mount bidet seat to toilet. Bolt Guide BACK Bolt Bolt STEPS 1 Turn Off Water.
PAGE 6
9 Installation 7 Wireless remote mounting guide. (BB-2000) Separation Of Unit From The Toilet Bowl 1 Disconnect the power plug. 2 Close water supply shut-off valve. 3 Drain water from bidet seat using drainage as illustrated. 4 Remove bidet seat from toilet as illustrated. Install wireless remote with adhesive tape Remove adhesive from back of bracket and place bracket where desired. Adhesive tape Wall Inserting batteries Insert supplied batteries (1.5V AAA) and close battery cover.
PAGE 7
8 Maintenance 9 Water Draining CLEANING THE NOZZLE DRAINING THE WARM WATER TANK IN THE UNIT If you do not intend to use this product for 14 days or longer, drain the water from this product’s warm water tank. When the “Posterior Wash ( )” button is pressed / for 3 seconds without occupying the seat, the nozzle can be cleaned with a soft toothbrush. ( : in Simple Operation panel -Remote Model) After cleaning the nozzle, push the “Stop ( )” / button once again, and the nozzle retracts itself.
PAGE 8
10 Trouble Shooting Trouble 11 Specifications Cause Remedy 1. The water tank is not filled. 1. Wait about one minute. 2. The shut off valve is closed. 2. Press the desired washing button once again. The washing water does not spray 3. Freezing inside the main unit or the water supply pipe. Specification Power Rating 4. Heat the room (for about two hours). frozen will cause a malfunction. The unit is not operating 2. Check the power supply system in 3. The battery of remote controller is 3.