User Guide
16
5
Operation (Details)
Auto Wash
- If the "MASSAGE"( , ) function selected when user is not using wash functions,
it automatically operates wash and dry function sequentially.
- Wash (30 Seconds) + Dryer (1minute) then automatically stops
儜 When using the Posterior Wash or Feminine Wash functions, pressing the "MASSAGE"( , )
button will provide a pulsation spray.
儜You may change the pressure of the spray by pressing the "High"( ) button or "Low"( ) buttons.
儜Push the "MASSAGE"( , ) button again and the pulsating action will stop automatically.
Auto-Setting of Massage Feature
儜You can set this function to automatically pulsate whenever the seat is occupied and the Posterior
or Feminine washes are in operation.
Step 1: Sit on this product.
Step 2: Press the "MASSAGE"( , ) button for 3 seconds or until you hear a single Chime.
Step 3: Sit on this product and proceed with Posterior or Feminine Wash.
Note: In the automatic setting, you may still adjust the pressure of the pulsating spray by
pressing the "High"( ) or "Low"( ) functions.
Canceling the Automatic Oscillation function
Step 1: Sit on this product.
Step 2: Press the "MASSAGE"( , ) button for 3 seconds or until you hear a double Chime.
MASSAGE (Rhythm Wash)
Night Light on/off setting
- Press "Stop"and "Temperature"remote buttons simultaneously until
night light is turned on or off.
Nozzle Shower
- Press "Move"( , ) button while seat is not occupied.
- Nozzle shower will initiate to clean nozzle and tip for about 20 seconds.
- Nozzle will automatically retract once finished.
X^XXWYiiTX^WWSYWWWG|zlyNGthu|hsUGGGX] YWX^TXXTWZGGG㝘㤸GXXaY_aXX
OPERATION
Installation Manual and Operating Instructions
17
Nozzle Cleaning (Automatic)
- This product has an automatic nozzle self-cleaning function that
cleans the nozzle before and after each use.
Nozzle Cleaning (Manual)
- Press the "Posterior"( , ) button on the Auxiliary Control panel on the side of the seat without
occupying seat. The nozzle will fully extend. Gently clean the nozzle with a soft cloth or toothbrush.
- Press "Stop"( , ) button to retract nozzle to stand-by mode.
Selecting/Cancelling Silent Mode
- Beeping mode can be enabled or disabled.
- To select or cancel silent mode, press and hold down the "Stop"( , ) and "Massage"( , )
remote buttons simultaneously for approximately 3 seconds or until short beeps
Single short beep - Silent mode has been cancelled
Double short beeps - Silent mode has been set
- The new setting will automatically be saved if no other buttons are pressed.
ECONOMY (Energy Save Mode)
- Keep seat cover closed when not in use to prevent heat from being lost.
- Keep temperature set to low.
- Unplug the power cord if you do not plan to use the unit for a long period of time.
Saver On/ Off
- When pressing( , ) the energy saver LED on the main unit will turn on.
(press button again, the saver LED will turn off)
- Energy saver mode automatically maintains a water and
seat temperature of 89.6ĕ(32Ë).
- When using bidet in saver mode, it is turned to automatic saver.
- When you rise from the seat, it goes into saver mode.
- Seat temperature is maintained 32Ë.
Other energy saver tips
In order to save energy, please abide by the following instructions:
In energy saver mode, the seat heating
temperature could appear to be lower
than the actual temperature setting.
OFF
State
ON
State
Flashing
State
OCCUPIED
SENSOR
ENERGY
SAVER
POWER
BB-2000
DEODORANT
ENERGY
SAVER
POWER
BB-1700
X^XXWYiiTX^WWSYWWWG|zlyNGthu|hsUGGGX^ YWX^TXXTWZGGG㝘㤸GXXaY_aXX