Use Instructions

Page 6 / 27 IFU_EMB_AD_US-CA-EN_V2
SYMBOL LOCATION DESCRIPTION
DEVICE
US - Operation is subject to the following 2 conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
DEVICE
CANADA - Innovation, Science and Economic Development
Canada certification number (certification class A/B –
intentional radiator)
PACKAGING Distributor reference
PACKAGING Class II device (double isolation)
-
)
PACKAGING Type BF applied part
PACKAGING
Protection index IP22 (see section 9.3.: maintain water, dust
and light resistance)
PACKAGING For indoor use only
PACKAGING Moisture sensitive device
PACKAGING Temperature limits to which the device can be safely exposed.
PACKAGING Humidity limits to which the device can be safely exposed.
PACKAGING Pressure limits to which the device can be safely exposed.
PACKAGING Management of electrical and electronic waste.
Table 8 - Symbols on the device and its packaging (next)
4.2 WARNINGS AND CAUTIONS
NOTES:
- EMBODY must only be used for the intended use described in this manual.
- Read these instructions before you use EMBODY for the first time. Keep these
instructions in a safe place.
- The device must be used in the specified ambient conditions (do not expose the device
to temperatures above 40°C (104°F) or flames).
- If the device experiences an external mechanical impact (knocking, bumping, dropping,
etc.), this may cause malfunctioning of the device. In case of malfunctioning, please contact
a BIOCORP PRODUCTION authorized dealer for technical support.
- Never install a mobile application from unofficial stores on your phone.
- Using a phone of unknown origin causes risk and will invalidate the EMBODY warranty.
- Protect your personal health data by using a password on your smartphone.
- Periodic maintenance of EMBODY is not required, only daily inspection is
recommended. Maintenance of the EMBODY is required when the device does not pass
its functional testing. If the functional testing is not successful, you are prompted to
contact a BIOCORP PRODUCTION authorized dealer.