Use Instructions

Page 17 / 27 IFU_EMB_AD_US-CA-EN_V2
7. AFTER USE INSTRUCTIONS: DISASSEMBLE EMBODY FROM
PEN
Follow the procedure indicated below to disassemble EMBODY from your pen:
7.1 Remove the EMBODY base from the insulin pen. Use your thumb to press on
EMBODY and to remove it from the pen.
7.2 Then, remove the EMBODY button from the pen.
7.3 Follow section 5. on assembling your EMBODY to the new insulin pen.
NOTE :
It is not necessary to pair your EMBODY again when changing the pen (unless your
system has been reset - see section 8.2. Reset instructions).
CAUTION
- EMBODY models are only compatible with the disposable insulin pens (Solostar,
Kwikpen, Flexpen) they are designed for. Do not attach to, pair or use with any other
insulin pen types.
- If you need to inject more than the number of units left in the pen, you may either:
1) Inject the amount left in your pen and then use a new pen to deliver the rest of your
dose: the EMBODY application will then display 2 successive injections, or
2) Get a new pen and inject the full dose: the EMBODY application will display one full
dose injection.
CAUTION
When EMBODY is transferred onto a new pen, the application automatically detects a
“mounting event” (e.g..: your base and / or the button have / has been removed from
the original pen).
In this situation, follow the application manufacturer’s instructions to confirm the new pen
type currently assembled with EMBODY.