User manual

HOW TO OPERATE
1. Place your feet onto ElectroFlex
2. Press (and hold down for 3 seconds) the on/off button, the
LCD screen will light up in blue.
3. Select the program you wish to use there are 10 different
programs which are indicated on the LCD display.
4. The intensity automatically comes on at the lowest level.
The intensity level is adjustable between 0 and 40.
5. Gently increase intensity setting by pushing the button
“︿”.
Decrease intensity setting by pushing the button of
“﹀”. (Left
button for “Band 1”, right button for “Band 2”.) Left and
right intensity levels are independently adjustable. LEFT
being BAND 1 and RIGHT being BAND 2.
6. You can adjust the program anytime. Once re-adjusted the
intensity will return to ‘0’. So you will have to increase the
intensity to the desired level.
7. To terminate the massage period, user can turn off the unit
anytime by pressing the on/off button for 3 seconds.
The unit has an auto timer, it will start to count down from 25
minutes of massage and switch off automatically.
USING THE GEL PADS
Connect the output wire to the Electrode Gel Pads. Connect the
other end of the output wire to the output jack of the Electro-
Flex. Remove the protecting film from the adhesive pads.
Attach the Electrode Gel Pads to the skin. Press the on/off but-
ton for 3 seconds to turn on the unit and adjust the stimulating
mode and output intensity to the desired level. (The display will
show the mode and the level that you selected and start to count
down).