Model: 2002 Irregular Heartbeat Detection (IHD) 100 Memories USER' S MANUAL MEDICAL & HEALTHCARE SPECIALIST
TABLE OF CONTENTS Introduction ...................................................................................... 2 Notes on safety..................................................................................3 Features of the Product ................................................................... 4 Main Unit ......................................................................................... 5 INTRODUCTION Thank you for purchasing the upper arm Semi-Automatic Blood Pressure Monitor.
NOTES ON SAFETY * The warning signs and sample icons shown here are listed for your safe and correct use of the unit, so as to prevent injuries or damages to properties. * The icons and meanings are as follow. The icon indicates prohibitions (what you sho uld not do). Matters involving actual prohibitions are indicated by text or pictures in or near . The left icon refers to "general prohibition". The icon indicates something that is compulsory (What must always be observed).
INSTALL OR REPLACE BATTERIES MAIN UNIT When the battery symbol appears on the display or nothing is display while inflation during measurement, you should replace with new batteries. 1. Slide the battery cover to open. 2. Insert two "AAA" batteries in the correct polarity direction. 1. Systolic Value 7. Air Tube 2. Diastolic Value 8. Upper Arm Cuff 3. Pulse/min Value 9. Inflation Bulb 4. MEMORY Button 10. Exhaust Valve 5. POWER and ON/OFF Button 11. Air Tube Hole 6.
SYMBOLS ON DISPLAY VALUE OF SYSTOLIC VALUE OF DIASTOLIC VALUE OF PULSE RATE BLOOD PRESSORE LEVEL BAR IRREGULAR HEARTBEAT ICON INFLATION DEFLATION UNIT OF PRESSURE AIR INFLATION BULB ICON ATTENTION OF ERROR LOW BATTERY USER # MEMORY HOW TO USE THE UPPER ARM CUFF 1. Push the cuff over the left upper arm so that the tube points in the direction of the lower arm . 2. Lay the cuff on the arm as illustrated.
HOW TO MEASURE BLOOD PRESSURE 1. Set up the cuff to your upper arm as previous section of "How to use the upper arm cuff". 2. Press the " ON/OFF " button, all icons appear two seconds on LCD, and display "0" and the " " " "symbols. 6. Press down the Exhaust Valve on the top of bulb to completely deflate the remaining air pressure in the cuff.
SPECIFICATIONS Operation Voltage 3V DC Standby Current 20~50 uA Operation Current ON: <10 mA * Specifications may be changed without notice in the event of Improvement being made.
