Operation Manual
R
Note:
To delete all memory, please refer to the Page 13/14
point 5 for details.
If there is no memory, it will display "--" and then turned
off automatically.
2. Device display last 3 measurement data average within
few seconds and total number of memory inside that user.
3. Press “MEMO” to review the memory.
Repeated press “Memo” button to review memory data
in ascending order.
1. Use a dry, soft cloth to clean the unit. If necessary, use
a cloth lightly dampened with tap water.
2. Do not use alcohol, benzene, thinner
or other harsh chemicals to clean
the device or cuff.
HOW TO MAINTAIN AND STORE THE UNIT
4. Store the unit in places far
from direct sunlight, high
humidity or dust.
5. Fold the pressure cuff and
put the unit into the store box.
Note:
When the unit will not be used for a long time, be sure to
remove the batteries. Otherwise, the batteries may leak
and damage the unit.
1. Do not drop the device and avoid and avoid sudden jars
or shocks.
2. Do not insert any objects into any holes.
3. Do not attempt to disassemble the unit.
4. Do not crush the pressure cuff.
o
5. If the unit has been stored at below 0 C, put it in a warm
place for about 30 minutes before using it. Otherwise,
may get wrong measurement result.
HOW TO PREVENT A MALFUNCTION
-19- -20-
3. Before measuring please
wash your hand. Do not
wash or wet the wrist cuff.
Average last 3
measurements
Total
measurements
in memory
User
R
R