Operation Manual

PIC-9 PIC-10
o o
7) While the temperature measured lower than 32 C(89.6 F),
Lo (stands for "Low") will be showed on the screen.
(Refer to the PIC-10)
8) If the battery power icon flash while the device is turned
on, the power of the battery is very low, the device can not
work and will shut off in 10 seconds. (Refer to the PIC-11)
PIC-11
5) While the ambient temperature beyond the working scale,
(refer to technical specifications) the device will not work
with Err showed on the screen. (Refer to the PIC-8)
o
6) While the temperature measured higher than the 42.9 C
o
(109.2 F), Hi (stands for "High") will be showed on the
screen. (Refer to the PIC-9)
Review Memory Data
1) Press "Power" button to turn on the device, you will hear
"Bi-Bi" to enter the measurement mode.
2) Press "Power" button again, to see the memory
sequence number "1" flashing, it is in the memory
review mode.
3) Press "Start" button to review the memory data from 1
up to 19 memories.
4) Press and Hold "Power" button for more than 3 seconds
to turn device off, or wait 30 seconds idle, device will
turn off automatically.
PIC-12
Convert Between Celsius and Fahreaheit Unit
1) Press "Power" button to turn on the device, you will hear
"Bi-Bi" to enter the measurement mode.
2) Press "Power" button twice to enter Unit Convert Mode.
o o
3) Press "Start" button to change unit between " C" and " F".
(Refer to the PIC-12)
4) Press and Hold "Power" button for more than 3 seconds
to save and turn device off.
3) Install two "AAA" batteries, according to the polarity
marked inside the battery compartment.
(Refer to the PIC-15)
4) Replac the battery cover. (Refer to the PIC-16)
PIC-15 PIC-16
TECHNICAL SPECIFICATIONS
E128
Measuring range
2X1.5Volt "AAA" batteries
display backlight
indicator
3.
4.
WARRANTY
We grant you a one year warranty after the date of
purchase. Any damage causes by improper handling shall
not be covered by the warranty. Batteries and packaging
are excluded from the warranty. Any other improper usage
damage claims excluded. A warranty claim must be
submitted with the purchase receipt. Please pack your
defective thermometer well and return to dealer.
611-128000-000
VER 1.0, 12/2007
LOW BATTERIES
There are battery power signs showing the status of the
power capacity on the screen.
The power is abundant.
The power is enough.
The power is small, the device
can still work, but the abnormity
of the background light and
buzzer. Please prepare for the
replacing of the battery.
Flashing, the power is weak,
the device can not work,
please replace the battery.
CHANGING THE BATTERY
1) Pull off the battery cover according to the
illustrator. (Refer to the PIC-13)
2) Take out the battery. (Refer to the PIC-14)