User manual

4
SECURITY LIGHT WITH MOTION SENSOR INSTALLATION
5
CONNECTING YOUR SYSTEM
The Security Light with Motion Sensor can be set to automatically turn on. Use Hook to angle in the direction
of where you want to detect motion of passerbys.
4.1 5.1
Return Control Box to secure position by sliding down over wall screws. Extend Radio Antenna above Control Box and
wrap around one of the Hanging Light or Solar Panel wires to secure.
5.2
Secure Light Switch of security light on inside wall using [2x] screws or nails.
4.2
Remove Control Box from wall by lifting up and away from wall screws. Connect 2 Hanging Lights and Solar Panel
cords to the ports in the back of the Control Box as shown.
x2
9
10