User's Manual

Smart Storage Agitator for PC4200 User Manual
Version: 2.2
Validation date of the manual: 31/10/2018 16 of 33
Within the same SST-A kit of the 4 SST-A kits included in the full set; In the event of a write failure on
an RFID chip, an error message is returned to the request-initiated third-party system and the LED of
one or two satellites lights up in orange.
If the RFID chip that could not be written is in:
• drawer # 1
o The LED of satellite # 1 is lit in orange
• drawer # 2
o The LED of satellite # 1 is lit in orange
The LED of satellite # 2 is lit in orange
• drawer # 3
o The LED of satellite # 2 is lit in orange
The LED of satellite # 3 is lit in orange
• drawer # 4
o The LED of satellite # 3 is lit in orange
The LED of satellite # 4 is lit in orange
• drawer # 5
o The LED of satellite # 4 is lit in orange
The orange LED should be off if the write operation is working again or if the RFID tag is no longer
present.
Orange LED on steady
An error occurs while writing an RFID chip with no
hardware failure identified
Orange LED on blinking
A drawer is left open more than 4 minutes
Red LED on
Hardware failure (Antenna failure....)