User's Manual

Smart Storage Agitator for PC4200 User Manual
Version: 2.2
Validation date of the manual: 31/10/2018 18 of 33
4. Safety instructions
This chapter details the safety precautions to be applied when using the SST-A for PC4200.
Please read these instructions carefully
4.1. General safety
• Have all installation work and adjustments performed by qualified
personnel only. Operations performed by persons lacking competence in this
area may adversely affect the performance of the device and cause damage
to property and body.
• Only qualified service technicians will be authorized to perform
maintenance operations and repairs.
• Make sure that the power cord is not pinched or kinked when installing or
moving the machine.
• Do not disassemble or modify system elements once the installation has
been validated.
• Do not put an object other than insert bags on a drawer.
• Do not lean on a drawer.
• The SST-A for PC4200 cannot be stored or used outside the temperature
and air pressure ranges specified in this manual (chapter 2.2)
• Do not cover the drawers of the SST-A for PC4200 and / or obstruct the air
vents.
• The SST-A for PC4200 must be fixed in the Platelet agitator so that it cannot
be disassembled without the use of a tool (as part of a maintenance
operation).
• Never allow water or other liquids to enter the equipment to avoid the risk
of short circuiting or oxidation of metal parts.
• The use of the SST-A for PC4200 is limited to trained and qualified
personnel to work in a medical environment.
• Excluding maintenance activities (see installation and maintenance manual),
do not disconnect the power supply (110 / 220Vac - 12Vdc), do not
disconnect the cable between the calculator and the RFID module attached to
the back of the unit, do not disconnect the Ethernet network cable.
• Do not disconnect satellite from the RFID card if the SST-A for PC4200
system is powered.