User's Manual

Smart Storage High Density User Manual
Version
0.6
Manual validation date: 04/09/2020
17 of 31
RISK
SAFETY INSTRUCTIONS
Contamination
Follow the cleaning instructions.
Handling error
• Operators must undergo authorised Biolog-id training so that they know
how the product works, are familiar with the documentation and, more
specifically, are aware of the safety instructions.
• Trays must be handled with no sudden movements.
Electrical
• Install power supply connecting cables in accordance with applicable national
regulations.
• Take into account the machine-specific electrical voltages and compare them
to the voltages available at the installation location on the data plates before
the installation is connected.
• Machine wiring diagrams must be complied with.
• The device must be connected to a socket with a Circuit Protective
Conductor*
• To prevent the system from breaking down due to problems with other
electrical devices, it must be connected to a separate electrical circuit.
• Under no circumstances should it be connected to a multi-socket along with
other electrical devices.
• Before connecting and commissioning the machine, check that the power
supply is connected correctly.
• Ensure that the device connecting plug is readily accessible so that it can be
pulled out easily when necessary, without having to push other devices out of
the way.
• The power plug serves as a network disconnection device.
Mechanical
Regularly check the fixings.
Make sure that only trained operators who are familiar with the safety measures use
the SST-HD
Only pull out the trays using the handles provided.
After handling and before releasing the tray, always check that it is in a stable
state.