User's Manual

Smart Storage High Density User Manual
Version
0.6
Manual validation date: 04/09/2020
5 of 31
• Installation and maintenance manual. Note that the SST-HD must be installed
by a trained individual authorised by Biolog-id.
• Manual for using the HMI (Human Machine Interface)
All these manuals are available in paper and PDF format.
2 Presentation of the Smart Storage High Density (SST-HD).
2.1 Claimed use of the SST-HD.
The SST-HD is a class I medical device used as a blood bank refrigerator or cold room
accessory. It is a fixed device which can only be used inside this type of equipment.
The SST-HD is a Radio-Frequency Identification (RFID) product used to track packed red
blood cell (RBC) bags. It improves blood bag storage safety.
The SST-HD is in permanent communication with the RFID tags affixed to the bags. This
ensures that the history of each bag is recorded and accessible to users.
The SST-HD tracks all bag movements into and out of the storage unit and displays a stock
status.
Figure 1 – Processor (above) and 20-tray SST-HD kit (right)
The SST-HD can also exchange and write data by communicating with third-party software.
This software can then display data relating to a bag (expiry date, movements, etc.).
2.2 Required environmental characteristics for SST-HD operation.
The SST-HD is designed to be used in a hospital environment by laboratory technicians who
have been specifically trained to handle blood products.
The SST-HD is used inside a blood bank refrigerator or cold room that has been specifically
qualified to work with this medical device. (See Chapter 2.4, Hardware and software
compatibility).