User's Guide

8
2.2 Charging
Using the tethered USB cable to connect the charging case to a power
adaptor and plug it into a power outlet to charge the device. You can
use any USB power adapter, e.g. of your mobile phone.
Approximately three hours are needed to fully recharge the OrthoPulse®
device. A green status light will indicate a sufficient battery charge to
complete two treatment sessions. When the device is fully charged, the
status light will turn off and the device will sleep automatically.
Two sessions can be completed on one full charge. The device must be
recharged after each 10-minute treatment. If the status light is solid
yellow, the device needs to be recharged prior to use.
CAUTION: Place the OrthoPulse® on a stable flat surface and
out of the way to avoid tripping hazards.
2.3 Status Light Guide
Pick up the OrthoPulse® to check the status light before your treat-
ment.
Ready for treatment
Low battery, not ready
Error, consult your dentist
In hand
Treatment started
Treatment completed
Treatment paused
x2
In treatment
Charging
Error
Charging completed
Charger case status
Charging, ready
Charging, not ready
Fully charged, ready
Restarting
Ready for Bluetooth
®
Syncing
In charging case